Greens - Instruments

Tools use for distractor for tibia and Femur Small,Electronic Tourniquet,Esmarch Rubber,Paedritic Tibial & femur Reduction Device (F-Tool small),Pneumatic Tourniquet, Complete with 3 cuffs inflation bag and gauge in the carrying case with pump Sterilization Tubes (Suitable for Pin,K,Wires Drill Bits), Sterlization Tubes ( Suitable for ilizarov Wire), Skin Grafting Handle, Skin Grafting Knife, Small Skin Grafting Handle, Large Distractor for Tibia & Femur.

Murphy Lane Bone Skid

Trocar

Murphy Lane Bone Skid

Trocar

Greens - Instruments Products

AWLS

#	Cat. No.	Metal	Sizes
1	401.010	SS	Bone Awl with Fibre Handle- Ø 1.2mm, Curved
2	401.011	SS	Bone Awl with Fibre Handle- Ø 1.2mm, Straight
3	401.025	SS	Bone Awl with Fibre Handle- Ø 1.5mm, Curved
4	401.030	SS	Bone Awl with Fibre Handle- Ø 3.0mm, Curved
5	401.031	SS	Bone Awl with Fibre Handle- Ø 3.0mm, Straight
6	401.040	SS	Bone Awl with Fibre Handle- Ø 3.5mm, Curved
7	401.041	SS	Bone Awl with Fibre Handle- Ø 3.5mm, Straight
8	401.050	SS	Bone Awl with Fibre Handle- Ø 4.0mm, Curved
9	401.051	SS	Bone Awl with Fibre Handle- Ø 4.0mm, Straight
10	401.100	SS	Kuntscher\'s Diamond Pointed Awl- Curved
11	401.101	SS	Kuntscher\'s Diamond Pointed Awl- Straight
12	401.106	SS	Square Nail Awl With T- Handle
13	401.107	SS	CANNULATED STARIGHT AWL
14	401.108	SS	Enders Nail Awl
15	904.135	SS	AWL WITH T HANDLE (CANNULATED)
16	906.300	SS	Microfracture Awl,

BENDER

#	Cat. No.	Metal	Sizes
1	402.110	SS	Bending Iron for Ø2.7 and 3.5mm
2	402.120	SS	Bending Iron for Ø3.5 and 4.5mm
3	402.130	SS	Roller Plate Bender- Large(for Narrow & Broad plates)
4	402.140	SS	Bending Press- Large (A.O. type
5	402.150	SS	K. Wire Bender
6	402.160	SS	Bending Iron for Reconstruction Plates Ø3.5 and 4.5mm
7	402.170	SS	PLATE BENDER Small
8	402.180	SS	Cervical Bender
9	402.190	SS	V - NAIL BENDER
10	402.195	SS	BENDING ROD 3.0MM / 3.5MM
11	402.200	SS	BENDING ROD 4.0MM / 4.5MM
12	402.205	SS	RUSH NAIL BENDER
13	402.206	SS	Bending Template
14	402.207	SS	PLATE BENDER TEMPLET Ø 3.5
15	402.208	SS	PLATE BENDER TEMPLET Ø 4.5
16	402.210	SS	Pelvic PlateTemplate –straight
17	402.212	SS	Pelvic PlateTemplate – curved
18	402.214	SS	Pelvic PlateTemplate – J type

BONE HOLDING CLAMPS Lowman's Bone Holding Clamps

#	Cat. No.	Metal	Sizes
1	403.125	SS	Lowman's Bone Holding Clamp- 125mm Small (for Forearm Bones)
2	403.160	SS	Lowman's Bone Holding Clamp- 160mm Medium(for Humerus)
3	403.200	SS	Lowman's Bone Holding Clamp- 200mm Large(for Femur & Tibia)
4	403.300	SS	Burn Bone Holding Forcep

Lane's Bone Holding Froceps

#	Cat. No.	Metal	Sizes
1	404.200	SS	Lane's Bone Holding Forceps with Rachet- 200mm
2	404.250	SS	Lane's Bone Holding Forceps with Rachet- 250mm
3	404.300	SS	Lane's Bone Holding Forceps with Rachet- 300mm
4	404.420	SS	Lane's Bone Holding Forceps without Rachet- 200mm
5	404.425	SS	Lane's Bone Holding Forceps without Rachet- 250mm
6	404.430	SS	Lane's Bone Holding Forceps without Rachet- 300mm

BONE SPREADER

#	Cat. No.	Metal	Sizes
1	407.140	SS	Bone Spreader- 140 mm
2	407.210	SS	Bone Spreader- 210 mm
3	407.270	SS	Bone Spreader- 270 mm

BONE CUTTER

#	Cat. No.	Metal	Sizes
1	408.190	SS	Bone Cutting Forceps- Double Action, 190 mm, Straight
2	408.191	SS	Bone Cutting Forceps- Double Action, 190 mm, Curved
3	408.225	SS	Bone Cutting Forceps- Double Action, 225 mm, Straight
4	408.226	SS	Bone Cutting Forceps- Double Action, 225 mm, Curved
5	408.227	SS	Bone Cutting Forceps- Double Action, 225 mm, Angular
6	408.270	SS	Bone Cutting Forceps- Double Action, 270 mm, Straight
7	408.271	SS	Bone Cutting Forceps- Double Action, 270 mm, Curved
8	408.350	SS	Tudor Edward Bone Cutting Forcep

BONE NIBBLER

#	Cat. No.	Metal	Sizes
1	409.150	SS	Bone Nibbler- Double Action, 150 mm, Straight
2	409.190	SS	Bone Nibbler- Double Action, 190 mm, Straight
3	409.191	SS	Bone Nibbler- Double Action, 190 mm, Curved
4	409.192	SS	Bone Nibbler- Double Action, 190 mm, Angular
5	409.200	SS	Bone Nibbler- Double Action, 200 mm, Straight
6	409.225	SS	Bone Nibbler- Double Action, 225 mm, Straight
7	409.226	SS	Bone Nibbler- Double Action, 225 mm, Curved
8	409.227	SS	Bone Nibbler- Double Action, 225 mm, Angular
9	409.250	SS	Bone Nibbler- Double Action, 250 mm, Straight
10	409.270	SS	Bone Nibbler- Double Action, 270 mm, Straight
11	409.272	SS	Bone Nibbler- Double Action, 270 mm, Angular
12	409.350	SS	Bone Nibbler- Single Action - 150MMStraight
13	490.271	SS	Bone Nibbler- Double Action, 270 mm, Curved

CHISEL

#	Cat. No.	Metal	Sizes
1	410.005	SS	Chisel with Fibre Handle-5 mm
2	410.010	SS	Chisel with Fibre Handle- 10 mm
3	410.015	SS	Chisel with Fibre Handle- 15 mm
4	410.018	SS	Chisel with Fibre Handle- 18 mm
5	410.020	SS	Chisel with Fibre Handle- 20 mm
6	410.025	SS	Chisel with Fibre Handle- 25 mm
7	410.030	SS	Chisel with Fibre Handle- 30 mm
8	913.170	SS	HOLLOW CHISEL

Gouge

#	Cat. No.	Metal	Sizes
1	413.050	SS	Gouge with Fibre Handle-5 mm, Straight
2	413.051	SS	Gouge with Fibre Handle-5 mm, Curved
3	413.060	SS	Gouge with Fibre Handle-6 mm, Straight
4	413.061	SS	Gouge with Fibre Handle-6 mm, Curved
5	413.100	SS	Gouge with Fibre Handle- 10 mm, Straight
6	413.101	SS	Gouge with Fibre Handle- 10 mm, Curved
7	413.120	SS	Gouge with Fibre Handle- 12 mm, Straight
8	413.150	SS	Gouge with Fibre Handle- 15 mm, Straight
9	413.151	SS	Gouge with Fibre Handle- 15 mm, Curved
10	413.160	SS	Gouge with Fibre Handle- 16 mm, Straight
11	413.161	SS	Gouge with Fibre Handle- 16 mm, Curved
12	413.180	SS	Gouge with Fibre Handle- 18 mm, Straight
13	413.181	SS	Gouge with Fibre Handle- 18 mm, Curved
14	413.201	SS	Gouge with Fibre Handle- 20 mm, Curved
15	413.202	SS	Gouge with Fibre Handle- 20 mm, Straight
16	413.240	SS	Gouge with Fibre Handle- 24 mm, Straight
17	413.241	SS	Gouge with Fibre Handle- 24 mm, Curved
18	413.250	SS	Gouge with Fibre Handle- 25 mm, Straight
19	413.251	SS	Gouge with Fibre Handle- 25 mm, Curved
20	413.300	SS	Gouge with Fibre Handle- 30 mm, Straight
21	413.301	SS	Gouge with Fibre Handle- 30 mm, Curved

CLAMP

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	413.601	SS	Charnley Compression Clamps with 2 Steinmann Pins

CURETTE

#	Cat. No.	Metal	Sizes
1	413.700	SS	Volkman Bone Curette ( Double Ended)
2	413.705	SS	Bone Curette with Fibre Handle- Small
3	413.710	SS	Bone Curette with Fibre Handle- Medium
4	413.715	SS	Bone Curette with Fibre Handle- Large

DRILL SLEEVE , TAP SLEEVE

#	Cat. No.	Metal	Sizes
1	1596.005	SS	Double Drill Sleeve- Ø 3.5/2.5 mm
2	1596.006	SS	Double Drill Sleeve- Ø 4.0/2.5 mm
3	1596.007	SS	Double Drill Sleeve- Ø 4.5/3.2 mm
4	1596.008	SS	Double Drill Sleeve- Ø 6.5/3.2 mm
5	1596.009	SS	Double Drill Sleeve- Ø 6.5/4.5 mm
6	1596.065	SS	TAP SLEEVE 3.5MM FOR TAP 3.5MM
7	312.470	SS	Drill Sleeve Pointed (C- Pointed Drill Guide)
8	312.480	SS	Insert Drill SleeveØ 4.5/ 3.2mm

DISSECTORS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	415.450	SS	Blunt Dissectors

ESMARCH BANDAGE

#	Cat. No.	Metal	Sizes
1	418.075	SS	Esmarch Rubber Bandage- 75mm
2	418.100	SS	Esmarch Rubber Bandage- 100mm
3	418.125	SS	Esmarch Rubber Bandage- 125mm
4	418.150	SS	Esmarch Rubber Bandage- 150mm

EXTRACTORS

#	Cat. No.	Metal	Sizes
1	419.010	SS	K. Nail Extractor with hooks
2	419.050	SS	Square Nail Extractor (set of 3) -
3	419.160	SS	K. Nail Extractor with hooks
4	419.195	SS	Spare A.M. Nail Extractor RAM
5	419.200	SS	Spare A.M. Nail Extractor Rod
6	419.250	SS	Spare Hook for K. Nail Extractor
7	903.195	SS	Proximal Fragment Manupilator- Optional
8	903.210	SS	Broken Interlocking Nail Extractor- Ø3mm- Optional
9	903.215	SS	Broken Interlocking Nail Extractor- Ø4mm- Optional

FORCEPS

#	Cat. No.	Metal	Sizes
1	420.035	SS	Screw Holding Forcep- Ø 3.5 mm
2	420.045	SS	Screw Holding Forcep- Ø 4.5 mm
3	420.080	SS	Forcep for Screw Removal 3.5MM
4	420.090	SS	Forcep for Screw Removal 4.5MM

GAUGES

#	Cat. No.	Metal	Sizes
1	1598.010	SS	DEPTH GOUGE FOR 1.2MM SCREWS
2	1598.014	SS	DEPTH GOUGE FOR 1.5MM SCREWS
3	421.030	SS	Depth Gauge for Ø 2.4/2.7 mm
4	421.034	SS	Depth Gauge for Ø 3.4 mm
5	421.035	SS	Depth Gauge for Ø 3.5 mm
6	421.045	SS	Depth Gauge for Ø 4.5 mm
7	903.150	SS	Depth Guage For Interlocking- Ø 4.9mm

GUIDES

#	Cat. No.	Metal	Sizes
1	1596.030	SS	Neutral & Loaded Drill Guide for Ø 2.7 mm screw
2	421.235	SS	Neutral & Loaded Drill Guide for Ø 3.5 mm screw
3	421.245	SS	Neutral & Loaded Drill Guide for Ø 4.5 mm screw
4	421.250	TT	Drill Guide With Handle 2.7mm
5	421.251	TT	Drill Guide With Handle 3.5mm

HAMMER

#	Cat. No.	Metal	Sizes
1	422.200	SS	Bone Hammer with Fibre Handle 200 gms.
2	422.350	SS	Bone Hammer with Fibre Handle 350 gms.
3	422.500	SS	Bone Hammer with Fibre Handle 500 gms.
4	422.700	SS	Bone Hammer with Fibre Handle 700 gms.
5	422.725	SS	Bone Hammer Nylon Faced
6	422.750	SS	Bone Hammer with S.S. Handle 350gms.
7	904.130	SS	SLOTTED HAMMER FOR HUMERUS NAILS

HANDLES

#	Cat. No.	Metal	Sizes
1	423.100	SS	Handle for Insertion of Steinmann Pin & Schanz Screw
2	423.110	SS	Gigly Saw Handle- 1 pair
3	423.130	SS	T- Handle with S.S Chuck & Key
4	423.140	SS	Quick Coupling Adaptor with T- Handle
5	423.141	SS	Quick Coupling Adaptor With Coupling end
6	423.200	SS	Spare S.S Chuck with Key
7	423.201	SS	HANDLE FOR LCP DRILL SLEEVE/ GUIDE 2.7/3.5MM
8	423.202	SS	HANDLE FOR LCP DRILL SLEEVE/ GUIDE 4.3 MM

HOOKS

#	Cat. No.	Metal	Sizes
1	424.005	SS	Bone Hook- Small
2	424.010	SS	Bone Hook- Medium
3	424.015	SS	Bone Hook- Large
4	424.025	SS	SHARP HOOK
5	915.030	SS	Enders Nail Extractor Hook
6	647.104	TT	Facet Hook
7	647.105	TT	Supra Laminar Hook
8	647.106	TT	Infra Laminar Hook
9	655.110	TT	Laminar Hook R.D. (Unilock System)
10	655.112	TT	Laminar Hook N.B. (Unilock System)
11	655.114	TT	Laminar Hook A.B. (Unilock System)
12	655.116	TT	Laminar Hook W.B. (Unilock System)

IMPACTOR

#	Cat. No.	Metal	Sizes
1	424.100	SS	K. Nail Impactor
2	424.120	SS	Square Nail Impactor
3	424.140	SS	Rush Nail Impactor
4	424.145	SS	Enders Nail Impactor

INTRODUCERS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	424.250	SS	Guide Wire/ K. Wire Introducer

LEVERS

#	Cat. No.	Metal	Sizes
1	425.005	SS	Bone Lever Plain- Lane's type - Small
2	425.010	SS	Bone Lever Plain- Lane's type - Medium
3	425.015	SS	Bone Lever Plain- Lane's type - Large
4	425.100	SS	Bone Lever with Serrated End - small
5	425.105	SS	Bone Lever with Serrated End - Medium
6	425.110	SS	Bone Lever with Serrated End - Large

PLASTER CUTTING INSTRUMENTS

#	Cat. No.	Metal	Sizes
1	431.050	SS	Electric Oscillating Plaster Cutting
2	431.100	SS	Spare Oscillating Saw for Elec. Plaster cutter
3	431.220	SS	Plaster Saw- Heavy Handle
4	431.225	SS	Plaster Saw- Engel
5	431.230	SS	Plaster Saw- Bergman
6	431.235	SS	Plaster Scissors (Bohler)
7	431.240	SS	Plaster Spreader
8	431.250	SS	Plaster Bender/ Twister
9	431.252	SS	Plaster Opener Daws
10	431.255	SS	Finger Plaster Saw- Window Opener
11	431.260	SS	SAW BLADE

RASPS

#	Cat. No.	Metal	Sizes
1	432.030	SS	Rasp for Bipolar Prosthesis- LONG STEM
2	913.135	SS	Rasp for Modular Bipolar (Small)
3	913.136	SS	Rasp for Modular bipolar (Medium)

REAMER

#	Cat. No.	Metal	Sizes
1	433.006	SS	K. Nail Reamer Ø 6 mm
2	433.007	SS	K. Nail Reamer Ø 7 mm (20")
3	433.008	SS	K. Nail Reamer Ø 8 mm
4	433.009	SS	K. Nail Reamer Ø 9 mm
5	433.010	SS	K. Nail Reamer Ø 10 mm
6	433.011	SS	K. Nail Reamer Ø 11 mm
7	433.012	SS	K. Nail Reamer Ø 12 mm
8	433.013	SS	K. Nail Reamer Ø 13 mm
9	433.014	SS	K. Nail Reamer Ø 14 mm
10	433.107	SS	K. Nail Reamer Ø 7 mm (22")
11	433.200	SS	Square Nail Reamer Ø 2.0 mm
12	433.225	SS	Square Nail Reamer Ø 2.5 mm
13	433.230	SS	Square Nail Reamer Ø 3.0 mm
14	433.235	SS	Square Nail Reamer Ø 3.5 mm
15	433.240	SS	Square Nail Reamer Ø 4.0 mm
16	909.155	SS	Cannulated Hip pin Reamer 6.2 mm
17	909.160	SS	Cannulated Femoral Neck Screw Reamer 8mm

Hollow Mill Quick Coupling (Set of 3)

#	Cat. No.	Metal	Sizes
1	433.515	SS	Hollow Reamer/ Hollow Mill- Ø 1.5/ 2.0 mm
2	433.535	SS	Hollow Reamer/ Hollow Mill- Ø 3.5/ 4.0 mm
3	433.545	SS	Hollow Reamer/ Hollow Mill- Ø 4.5 mm

Cannulated Reamer (T-Handle) Ø 18 inch

#	Cat. No.	Metal	Sizes
1	434.006	SS	Cannulated Reamer (T-Handle) Ø 6 mm
2	434.007	SS	Cannulated Reamer (T-Handle) Ø 7 mm
3	434.008	SS	Cannulated Reamer (T-Handle) Ø 8 mm
4	434.009	SS	Cannulated Reamer (T-Handle) Ø 9 mm
5	434.010	SS	Cannulated Reamer (T-Handle) Ø 10 mm
6	434.011	SS	Cannulated Reamer (T-Handle) Ø 11 mm
7	434.012	SS	Cannulated Reamer (T-Handle) Ø 12 mm
8	434.013	SS	Cannulated Reamer (T-Handle) Ø 13 mm
9	434.014	SS	Cannulated Reamer (T-Handle) Ø 14 mm
10	434.016	SS	Cannulated Reamer (T-Handle) Ø 15 mm

RETRACTORS

#	Cat. No.	Metal	Sizes
1	435.005	SS	Self Retaining Retractor- Small
2	435.010	SS	Self Retaining Retractor- Medium
3	435.015	SS	Self Retaining Retractor- Large
4	435.025	SS	Self Retaining Retractor- Ex. Large
5	435.050	SS	Nerve Root Retractor (Set of 3)
6	435.060	SS	Nerve Root Retractor- Straight
7	435.065	SS	Nerve Root Retractor- 45 deg
8	435.070	SS	Nerve Root Retractor- 90 deg
9	435.080	SS	Bristow Retractor
10	435.090	SS	Dura Retractor
11	435.100	SS	Charnley Retractor with Weight & Chain
12	435.200	SS	Gelpi Retractor
13	659.104	SS	Bilateral Spine Retractor

Hohmann Retractors

#	Cat. No.	Metal	Sizes
1	1597.006	SS	Hohmann Retractor, Width- 06mm
2	1597.008	SS	Hohmann Retractor, Width- 08mm, L 220mm
3	436.010	SS	Hohmann Retractor, Width- 10mm,
4	436.012	SS	Hohmann Retractor, Width- 12mm,
5	436.013	SS	Hohmann Retractor, Width- 13mm,
6	436.014	SS	Hohmann Retractor, Width- 14mm,
7	436.016	SS	Hohmann Retractor, Width- 16mm,
8	436.018	SS	Hohmann Retractor, Width- 18mm, L 235mm (short narrow tip)
9	436.020	SS	Hohmann Retractor, Width- 20mm,
10	436.022	SS	Hohmann Retractor, Width- 22mm,
11	436.024	SS	Hohmann Retractor, Width- 24mm,
12	436.025	SS	Hohmann Retractor, Width- 25mm,
13	436.043	SS	Hohmann Retractor, Width- 43mm, L 240mm
14	436.044	SS	Hohmann Retractor, Width- 44mm, L 240mm
15	436.070	SS	Hohmann Retractor, Width- 70mm, L 240mm
16	436.118	SS	Hohmann Retractor, Width- 18mm, L 235mm (Long Narrow Tip)
17	436.122	SS	Hohmann Retractor, Width- 22mm,DOUBLE TIP
18	436.200	SS	HohmannRetractor,90°(LongandNarrowTip)forTHR/TKR
19	436.222	SS	Hohmann Retractor, Width- 22mm, L 250mm (Wide Tip)
20	436.250	SS	HohmannRetractor,90°(LongandNarrowDoubleTip)forTHR/TKR
21	436.300	SS	S- Retractor for THR/ TKR - 20MM

REDUCTION FORCEP

#	Cat. No.	Metal	Sizes
1	437.015	SS	Reduction Forceps- Serrated Jaw, Speed Lock
2	437.017	SS	Reduction Forceps- Serrated Jaw- 170mm Speed Lock
3	437.020	SS	Reduction Forceps- Serrated Jaw- 210mm Speed Lock
4	437.024	SS	Reduction Forceps- Serrated Jaw- 240mm Speed Lock

Reduction Forceps- Pointed, Speed Lock

#	Cat. No.	Metal	Sizes
1	437.130	SS	Reduction Forceps- Pointed- 130mm Speed Lock
2	437.150	SS	Reduction Forceps- Pointed- 150mm Speed Lock
3	437.170	SS	Reduction Forceps- Pointed- 170mm Speed Lock
4	437.210	SS	Reduction Forceps- Pointed- 210mm Speed Lock
5	437.240	SS	Reduction Forceps- Pointed- 240mm Speed Lock

Reduction Forceps- Rachet Lock

#	Cat. No.	Metal	Sizes
1	437.340	SS	Reduction Forceps- Serrated Jaw- 140mm Rachet Lock
2	437.370	SS	Reduction Forceps- Serrated Jaw- 170mm Rachet Lock
3	437.375	SS	Reduction Forceps- Serrated Jaw- 210mm Rachet Lock
4	437.420	SS	Reduction Forceps- Pointed- 200mm Rachet Lock

SCREW DRIVER

#	Cat. No.	Metal	Sizes
1	439.020	SS	Hexagonal Screw Driver with Fibre Handle- Ø 2.7 mm
2	439.035	SS	Hexagonal Screw Driver with Fibre Handle- Ø 3.5 mm
3	439.045	SS	Hexagonal Screw Driver with Fibre Handle- Ø 4.5 mm
4	439.050	SS	SCREW DRIVER FOR PFNA II NECK SCREW
5	439.119	SS	Hexagonal Screw Driver with Fibre Handle- Ø 1.5 mm
6	439.135	SS	POLY AXIL Hexagonal Screw Driver with Fibre Handle- Ø 3.5 mm
7	439.145	SS	POLY AXIAL Hexagonal Screw Driver with Fibre Handle- Ø 4.5 mm
8	439.151	SS	SCREW DRIVER WITH T- HANDLE 2.5MM FOR DISPOSABLE SLEEVE 1.8/ 2.0MM
9	439.152	SS	SCREW DRIVER WITH T- HANDLE 3.5MM FOR DISPOSABLE SLEEVE 2.8 MM
10	439.153	SS	SCREW DRIVER WITH T- HANDLE 4.5MM FOR DISPOSABLE SLEEVE 4.3 MM
11	439.160	SS	UNIVERSAL SCREW DRIVER WITH T- HANDLE FOR PFN / PFNA II
12	439.222	SS	Star Screw driver 1.5/2.0 (T6)
13	439.224	SS	Star Screw driver 2.4/2.7 (T8)
14	439.226	SS	Star Screw driver 3.5 (T15)
15	439.228	SS	Star Screw driver 4.5 (T25)
16	439.245	SS	Large Hexagonal Screw Driver with Holding Sleeve- Ø 4.5mm
17	439.350	SS	Small Hexagonal Screw Driver with Holding Sleeve- Ø 3.5 mm
18	439.500	SS	Screw Driver (Hexagonal) Ø 4.5mm for I.L
19	439.501	SS	Screw driver (hexagonal ) 4.5mm for pfna ii antirotation screwsize 4.5mm
20	439.502	SS	IMPACTOR SCREWS DRIVER CANNULATED FOR PFNA II
21	439.515	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 1.5 mm
22	439.520	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 2.0 mm
23	439.535	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 3.5 mm
24	439.545	SS	Hexagonal Screw Driver with Q.C Shaft- Ø 4.5 mm
25	439.612	SS	Spare Sleeve For Maxillofacial Screw Driver
26	439.613	SS	MAXILLOFACIAL SCREW DRIVER WITH SCREW HOLDING SLEEVE CROSS SLOTT with Q.C Shaft
27	439.614	SS	MAXILLOFACIAL SCREW DRIVER

Cannulated Screw Driver

#	Cat. No.	Metal	Sizes
1	1617.158	SS	Cannulated Screw Driver- Ø 4.5 mm for 7.2mm Cannulated Screw
2	439.615	SS	Cannulated Herburt Screw Driver- Ø 1.5MM
3	439.625	SS	CANNULATED SCREW DRIVER 2.0MM FOR HERBURT SCREW
4	439.635	SS	Cannulated Screw Driver- Ø 3.5/ 4.0mm
5	439.645	SS	Cannulated Screw Driver- Ø 4.5/ 6.5mm
6	439.655	SS	Cannulated Screw Driver- Ø 5.5mm
7	439.656	SS	Cannulated Screw Driver- Ø 4.0mm For 7.3mm Cannulated Screw

Torque Limiting Screw Driver

#	Cat. No.	Metal	Sizes
1	439.830	SS	Torque Limiting Screw Driver Ø 2.4/2.7mm
2	439.840	SS	Torque Limiting Screw Driver Ø 3.5/4.0mm
3	439.850	SS	Torque Limiting Screw Driver Ø 4.5 /5.0mm
4	439.855	SS	Star Torque Limiting Screw Driver Ø T8 For 2.4/2.7mm
5	439.857	SS	Star Torque Limiting Screw Driver ØT15 For 3.5/4.0mm
6	439.858	SS	StarTorque Limiting Screw Driver ØT25 For 4.5 /5.0mm

Crutch Filed Tong with 2 Burrs

#	Cat. No.	Metal	Sizes
1	440.100S	SS	Crutch Filed Tong with 2 Burrs- Small
2	440.105M	SS	Crutch Filed Tong with 2 Burrs- Medium
3	440.110L	SS	Crutch Filed Tong with 2 Burrs- Large
4	440.125	SS	2 Burrs (Spare) for Crutch Filed Tong

WIRE INSTRUMENTS

#	Cat. No.	Metal	Sizes
1	440.175	SS	Nose Plier cum Wire Bender cum Wire Cutter- 175mm
2	440.225	SS	Nose Plier cum Wire Bender cum Wire Cutter- 225mm
3	440.230	SS	Tip Wire Cutter
4	440.232	SS	Jumbo Wire Cutter
5	440.260	SS	Wire Twister- Circular
6	440.270	SS	Wire Twister cum Cutter
7	440.275	SS	Wire Tightner cum Twister
8	440.280	SS	Wire Tightner with 2 Pegs- Zet type
9	440.285	SS	K wire tractor -CumTensioner
10	440.305	SS	Wire Passer with - small
11	440.310	SS	Wire Passer with -medium
12	440.315	SS	Wire Passer with - large
13	440.375	SS	Circlage wire tightner
14	440.475	SS	Wire Tightner cum Twister
15	910.103	SS	WIRE SLEEVE 3.5MM
16	910.500	SS	WIRE SLEEVE 5.0MM
17	911.100	SS	Parallel Wire Guide
18	911.101	SS	Parallel Wire Guide Sleeve For HTO Plates
19	911.102	SS	Parallel Wire Guide Drill Sleeve For HTO Plates

Flexible Reamer Shaft- Fix Heads

#	Cat. No.	Metal	Sizes
1	441.060	SS	Flexible Reamer Shaft- Fix Heads - Ø 6.0 mm
2	441.065	SS	Flexible Reamer Shaft- Fix Heads - Ø 6.5 mm
3	441.070	SS	Flexible Reamer Shaft- Fix Heads - Ø 7.0 mm
4	441.075	SS	Flexible Reamer Shaft- Fix Heads - Ø 7.5 mm
5	441.080	SS	Flexible Reamer Shaft- Fix Heads - Ø 8.0 mm
6	441.081	SS	Flexible Reamer Shaft- Fix Heads 24"
7	441.085	SS	Flexible Reamer Shaft- Fix Heads - Ø 8.5 mm
8	441.090	SS	Flexible Reamer Shaft- Fix Heads - Ø 9.0 mm
9	441.095	SS	Flexible Reamer Shaft- Fix Heads - Ø 9.5 mm
10	441.100	SS	Flexible Reamer Shaft- Fix Heads - Ø 10.0 mm
11	441.105	SS	Flexible Reamer Shaft- Fix Heads - Ø 10.5 mm
12	441.110	SS	Flexible Reamer Shaft- Fix Heads - Ø 11.0 mm
13	441.115	SS	Flexible Reamer Shaft- Fix Heads - Ø 11.5 mm
14	441.120	SS	Flexible Reamer Shaft- Fix Heads - Ø 12.0 mm
15	441.125	SS	Flexible Reamer Shaft- Fix Heads - Ø 12.5 mm
16	441.130	SS	Flexible Reamer Shaft- Fix Heads - Ø 13.0 mm
17	441.135	SS	Flexible Reamer Shaft- Fix Heads - Ø 13.5 mm
18	441.140	SS	Flexible Reamer Shaft- Fix Heads - Ø 14.0 mm
19	441.145	SS	Flexible Reamer Shaft- Fix Heads - Ø 14.5 mm
20	441.150	SS	Flexible Reamer Shaft- Fix Heads - Ø 15.0 mm
21	441.160	SS	Flexible Reamer Shaft- Fix Heads - Ø 16.0 mm
22	441.170	SS	Flexible Reamer Shaft- Fix Heads - Ø 17.0 mm

DRILL BIT- S.S

#	Cat. No.	Metal	Sizes
1	426.005	SS	Drill Bit- Non Coupling, L- 125mm
2	426.011	SS	Drill Bit Ø 1.1mm x 125 mm- Non Coupling
3	426.015	SS	Drill Bit Ø 1.5mm x 125 mm- Non Coupling
4	426.018	SS	Drill Bit Ø 1.8mm x 125 mm- Non Coupling
5	426.020	SS	Drill Bit Ø 2.0mm x 125 mm- Non Coupling
6	426.025	SS	Drill Bit Ø 2.5mm x 125 mm- Non Coupling
7	426.027	SS	Drill Bit Ø 2.7mm x 125 mm- Non Coupling
8	426.030	SS	Drill Bit Ø 3.0mm x 125 mm- Non Coupling
9	426.032	SS	Drill Bit Ø 3.2mm x 125 mm- Non Coupling
10	426.035	SS	Drill Bit Ø 3.5mm x 125 mm- Non Coupling
11	426.040	SS	Drill Bit Ø 4.0mm x 125 mm- Non Coupling
12	426.041	SS	Drill Bit Ø 4.2mm x 125 mm- Non Coupling
13	426.045	SS	Drill Bit Ø 4.5mm x 125 mm- Non Coupling
14	426.150	SS	Drill Bit Ø5.0mm x 225 mm- Non Coupling
15	426.250	SS	Drill Bit Ø 4.0mm x 250 mm- Non Coupling

Drill Bit- Non Coupling, L- 225mm

#	Cat. No.	Metal	Sizes
1	426.125	SS	Drill Bit Ø 2.5mm x 225 mm- Non Coupling
2	426.127	SS	Drill Bit Ø 2.7mm x 225 mm- Non Coupling
3	426.130	SS	Drill Bit Ø 3.0mm x 225 mm- Non Coupling
4	426.132	SS	Drill Bit Ø 3.2mm x 225 mm- Non Coupling
5	426.135	SS	Drill Bit Ø 3.5mm x 225 mm- Non Coupling
6	426.140	SS	Drill Bit Ø 4.0mm x 225 mm- Non Coupling
7	426.143	SS	LC-LCP Drill Bit- Calibrated Ø 4.3 mm x 225 mm Non Coupling
8	426.145	SS	Drill Bit Ø 4.5mm x 225 mm- Non Coupling
9	426.225	SS	Drill Bit Ø 4.0 x 3.2mm x 225 mm- Non Coupling

Drill Bit- Non Coupling, L- 300mm

#	Cat. No.	Metal	Sizes
1	1612.028	SS	Drill bit Ø 4.3mm x 300 mm- Non Coupling
2	426.232	SS	Drill bit Ø 3.2mm x 300 mm- Non Coupling
3	426.240	SS	Drill bit Ø 4.0mm x 300 mm- Non Coupling
4	426.245	SS	Drill bit Ø 4.5mm x 300 mm- Non Coupling
5	426.300	SS	Drill bit Ø 4.0 x 3.2mm x 240 mm- Non Coupling

Drill Bit- Coupling End, L- 125mm

#	Cat. No.	Metal	Sizes
1	427.004	SS	DRILL BIT 2.5MM X 68MM FOR BLEXIBLE SHAFT
2	427.005	SS	DRILL BIT 3.2MM X 68MM FOR BLEXIBLE SHAFT
3	427.012	SS	Drill Bit Ø 1.2mm x 125 mm- Coupling End
4	427.015	SS	Drill Bit Ø 1.5mm x 125 mm- Coupling End
5	427.018	SS	Drill Bit Ø 1.8 mm x 125 mm- Coupling End
6	427.020	SS	Drill Bit Ø 2.0mm x 125 mm- Coupling End
7	427.022	SS	Drill Bit Ø 2.0mm x 175 mm- Coupling End FOR CERVICAL
8	427.023	SS	Drill Bit Ø 2.2mm x 175 mm- Coupling End FOR CERVICAL
9	427.025	SS	Drill Bit Ø 2.5mm x 125 mm- Coupling End
10	427.026	SS	Drill Bit Ø 2.5mm x 175 mm- Coupling End
11	427.027	SS	Drill Bit Ø 2.7mm x 125 mm- Coupling End
12	427.028	SS	Drill Bit Ø 2.8mm x 150 mm- Coupling End
13	427.030	SS	Drill Bit Ø 3.0mm x 125 mm- Coupling End
14	427.032	SS	Drill Bit Ø 3.2mm x 125 mm- Coupling End
15	427.035	SS	Drill bit Ø 3.5mm x 125 mm- Coupling End
16	427.040	SS	Drill bit Ø 4.0mm x 125 mm- Coupling End
17	427.041	SS	Drill bit Ø 4.3mm x 150 mm- Coupling End
18	427.045	SS	Drill bit Ø 4.5mm x 125 mm- Coupling End
19	910.101	SS	Drill bit Ø 2.8mm x 175 mm- Coupling End

Drill Bit- Coupling End, L- 225mm

#	Cat. No.	Metal	Sizes
1	427.125	SS	Drill bit Ø 2.5mm x 225 mm- Coupling End
2	427.127	SS	Drill bit Ø 2.7mm x 225 mm- Coupling End
3	427.128	SS	Drill bit Ø 2.8mm x 225 mm- Coupling End
4	427.130	SS	Drill bit Ø 3.0mm x 225 mm- Coupling End
5	427.132	SS	Drill bit Ø 3.2mm x 225 mm- Coupling End
6	427.135	SS	Drill bit Ø 3.5mm x 225 mm- Coupling End
7	427.140	SS	Drill bit Ø 4.0mm x 225 mm- Coupling End
8	427.143	SS	Drill bit Ø 4.3mm x 225 mm- Coupling End
9	427.145	SS	Drill bit Ø 4.5mm x 225 mm- Coupling End
10	910.100	SS	LC-LCP Drill Bit Ø 2.8 mm x 225 mm Coupling End
11	910.124	SS	LC-LCP Drill Bit- Calibrated Ø 4.2 mm x 225 mm Coupling
12	910.125	SS	LC-LCP Drill Bit- Calibrated Ø 4.3 mm x 225 mm Coupling
13	910.130	SS	LC-LCP Drill Bit- Calibrated Ø 3.7mm X 4.3 mm x 225 mm Coupling

Drill Tap with T-Handle

#	Cat. No.	Metal	Sizes
1	429.015	SS	Drill Tap with T-Handle Ø 1.5 mm
2	429.020	SS	Drill Tap with T-Handle Ø 2.0 mm
3	429.024	SS	Drill Tap with T-Handle Ø 2.4 mm
4	429.027	SS	Drill Tap with T-Handle Ø 2.7 mm
5	429.035	SS	Drill Tap with T-Handle Ø 3.5 mm ( 20 TPI)
6	429.040	SS	Drill Tap with T-Handle Ø 4.0 mm ( 14 TPI, cancellous)
7	429.045	SS	Drill Tap with T-Handle Ø 4.5 mm
8	429.065	SS	Drill Tap with T-Handle Ø 6.5 mm (9 TPI, cancellous)
9	429.135	SS	Drill Tap with T-Handle Ø 3.5 mm ( 14 TPI, cancellous)
10	429.140	SS	Drill Tap with T-Handle Ø 10.5 mm FOR PFNA II NECK SCREWS

Drill Tap with Coupling End

#	Cat. No.	Metal	Sizes
1	429.215	SS	Drill Tap with Coupling End Ø 1.5 mm
2	429.220	SS	Drill Tap with Coupling End Ø 2.0 mm
3	429.224	SS	Drill Tap with Coupling End Ø 2.4 mm
4	429.227	SS	Drill Tap with Coupling End Ø 2.7 mm
5	429.235	SS	Drill Tap with Coupling End Ø 3.5 mm ( 20 TPI)
6	429.240	SS	Drill Tap with Coupling End Ø 4.0 mm
7	429.245	SS	Drill Tap with Coupling End Ø 4.5 mm
8	429.265	SS	Drill Tap with Coupling End Ø 6.5 mm (9 TPI, cancellous)
9	429.335	SS	Drill Tap with Coupling End Ø 3.5 mm ( 14 TPI, cancellous)

Cannulated Drill Tap with T-Handle- Calibrated

#	Cat. No.	Metal	Sizes
1	429.435	SS	Cannulated Drill Tap with T-Handle Ø 3.5 mm
2	429.440	SS	Cannulated Drill Tap with T-Handle Ø 4.0 mm
3	429.445	SS	Cannulated Drill Tap with T-Handle Ø 4.5 mm
4	429.669	SS	Cannulated Drill Tap with T-Handle, Calibrated Ø 6.5 mm
5	429.670	SS	Cannulated Drill Tap with T-Handle, Calibrated Ø 7.0 mm

Cannulated Drill Bit- Calibrated, L- 125mm

#	Cat. No.	Metal	Sizes
1	428.120	SS	Cannulated Drill Bit- Calibrated- Ø 2.0mm x 100 mm
2	428.127	SS	Cannulated Drill Bit- Calibrated- Ø 2.7mm x 125 mm
3	428.130	SS	Cannulated Drill Bit- Calibrated- Ø 3.0mm x 125 mm
4	428.132	SS	Cannulated Drill Bit- Calibrated- Ø 3.2mm x 125 mm
5	428.135	SS	Cannulated Drill Bit- Calibrated- Ø 4.0mm x 125 mm
6	428.140	SS	Cannulated Drill Bit- Calibrated- Ø 4.5mm x 125 mm

Cannulated Drill Bit- Calibrated, L- 225mm

#	Cat. No.	Metal	Sizes
1	428.227	SS	Cannulated Drill Bit- Calibrated- Ø 2.7mm x 180 mm
2	428.232	SS	Cannulated Drill Bit- Calibrated- Ø 3.2mm x 180 mm
3	428.235	SS	Cannulated Drill Bit- Calibrated- Ø 3.5mm x 180 mm
4	428.327	SS	Cannulated Drill Bit- Calibrated- Ø 2.7mm x 225 mm
5	428.330	SS	Cannulated Drill Bit- Calibrated- Ø 3.0mm x 225 mm
6	428.335	SS	Cannulated Drill Bit- Calibrated- Ø 3.5mm x 225 mm
7	428.340	SS	Cannulated Drill Bit- Calibrated- Ø 4.0mm x 225 mm
8	428.345	SS	Cannulated Drill Bit- Calibrated- Ø 4.5mm x 225 mm
9	428.350	SS	Cannulated Drill Bit- Calibrated- Ø 5mm x 225 mm
10	428.360	SS	Cannulated Drill Bit- Calibrated- Ø 6mm x 225 mm
11	428.440	SS	Cannulated Drill Bit- Calibrated- Ø 4.0mm x 300 mm
12	428.455	SS	Cannulated Drill Bit- Calibrated- Ø 5.5mm x 330 mm

Bone Drill with S.S Chuck & Key

#	Cat. No.	Metal	Sizes
1	414.101	SS	Electric Drill with S.S Chuck & Key with Foot Control in Box
2	414.102	SS	Electric Drill with S.S Chuck & Key
3	414.103	SS	Adaptor for Flaxible Reamer
4	414.200	SS	Universal Bone Drill with S.S Chuck & Key- Closed gear
5	414.202	SS	Universal Bone Drill with S.S Chuck & Key- Open gear
6	414.300	SS	Micro Hand Drill with S.S Chuck & Key- Closed gear
7	414.302	SS	Micro Hand Drill with S.S Chuck & Key- Open gear

Bone File

#	Cat. No.	Metal	Sizes
1	440.325	SS	Bone File round and pointed
2	440.400	SS	bone file Flat - 100 mm
3	440.450	SS	bone file Flat -150 mm

Bone Plate Holding Forcep (Mani type)

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	420.070	SS	Bone Plate Holding Forcep (Mani type)

Box Punch

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	913.125	SS	Box Punch

Cannulated Reamer (T-Handle) Ø 22 inch

#	Cat. No.	Metal	Sizes
1	434.106	SS	Cannulated Reamer (T-Handle) Ø 6 mm
2	434.107	SS	Cannulated Reamer (T-Handle) Ø 7 mm
3	434.108	SS	Cannulated Reamer (T-Handle) Ø 8 mm
4	434.109	SS	Cannulated Reamer (T-Handle) Ø 9 mm
5	434.110	SS	Cannulated Reamer (T-Handle) Ø 10 mm
6	434.111	SS	Cannulated Reamer (T-Handle) Ø 11 mm
7	434.112	SS	Cannulated Reamer (T-Handle) Ø 12 mm
8	434.113	SS	Cannulated Reamer (T-Handle) Ø 13 mm
9	434.114	SS	Cannulated Reamer (T-Handle) Ø 14 mm
10	434.115	SS	Cannulated Reamer (T-Handle) Ø 15 mm

Cobbs Elevators with Fibre Handle-

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.200	SS	Cobbs Elevators with Fibre Handle-

Counter Sink

#	Cat. No.	Metal	Sizes
1	310.890	SS	Counter Sink- Ø 3.5mm
2	310.900	SS	Counter Sink-Cannulated S.S. T-Handle Ø 3.5 mm
3	890.120	SS	Counter Sink-Cannulated S.S. T-Handle Ø 4.5 mm
4	911.150	SS	Counter Sink- Ø 4.5mm

DHS Adjustable Angle Guide

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	200.303	SS	DHS Adjustable Angle Guide

Disc Forcep (Pitutary Rongeur)

#	Cat. No.	Metal	Sizes
1	438.410	SS	Disc Forcep (Pitutary Rongeur)- Straight
2	438.420	SS	Disc Forcep (Pitutary Rongeur)- Upward
3	438.430	SS	Disc Forcep (Pitutary Rongeur)- Downward
4	438.440	SS	Disc Forcep (Pitutary Rongeur)- Left
5	438.450	SS	Disc Forcep (Pitutary Rongeur)- Right

Femoral Distractor with Tomybar Large

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.102	SS	Femoral Distractor with Tomybar Large

Fibula Forcep

#	Cat. No.	Metal	Sizes
1	405.450	SS	Fibula Forcep- Bent
2	405.460	SS	Fibula Forcep- Straight

Flexible Reamer Shaft

#	Cat. No.	Metal	Sizes
1	441.059	SS	FLEXIBLE SHAFT FOR DRILL BIT
2	443.080	SS	Flexible Reamer Shaft- Ø 8.0 mm
3	443.090	SS	Flexible Reamer Shaft- Ø 9.0 mm
4	443.100	SS	Flexible Reamer Shaft- Ø 10.0 mm
5	443.101	SS	Flexible Reamer Shaft 24"

Hay Grooves Bone Holding Forcep

#	Cat. No.	Metal	Sizes
1	404.720	SS	Hay Grooves Bone Holding Forcep- 200mm
2	404.725	SS	Hay Grooves Bone Holding Forcep- 250mm
3	404.730	SS	Hay Grooves Bone Holding Forcep- 300mm
4	404.735	SS	Hay Grooves Bone Holding Forcep- 350mm

LC-LCP Drill Sleeve

#	Cat. No.	Metal	Sizes
1	1596.104	SS	LC-LCP Drill Sleeve/ Guide Ø 1.0 mm for lcp 1.5mm screws
2	415.355	SS	LC-LCP Trochantric Sleeve 3.2mm
3	910.102	SS	LC-LCP Drill Sleeve/ Guide Ø 2.8 mm
4	910.104	SS	LC-LCP Combined Drill Sleeve Ø 2.5mm / 2.8 mm
5	910.105	SS	LC-LCP Combined Drill Sleeve Ø 2.0mm / 2.7 mm
6	910.106	SS	LC-LCP Combined Drill Sleeve Ø 1.8mm / 2.4 mm
7	910.107	SS	LC-LCP Drill Sleeve/ Guide Ø 1.8 mm
8	910.108	SS	LC-LCP Drill Sleeve/ Guide Ø 2.0 mm
9	910.109	SS	DISPOSABLE SLEEVE 2.8MM
10	910.110	SS	DISPOSABLE SLEEVE 4.3MM
11	910.111	SS	DISPOSABLE SLEEVE 1.8MM
12	910.112	SS	DISPOSABLE SLEEVE 2.0MM
13	910.113	SS	LC-LCP Drill Sleeve/ Guide Ø 1.5 mm for lcp 2.0mm screws
14	910.128	SS	LC-LCP Drill Sleeve/ Guide Ø 4.3 mm
15	910.129	SS	LC-LCP Combined Drill Sleeve Ø 3.2mm / 4.3mm
16	910.131	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 1.8MM
17	910.132	SS	LCP VAIRABLE ANGLE DRILL SLEEVE 2.8MM

Lifter

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	890.350	SS	Lifter

Osteotome with Fibre Handle

#	Cat. No.	Metal	Sizes
1	411.050	SS	Osteotome with Fibre Handle-5 mm, Straight
2	411.051	SS	Osteotome with Fibre Handle-5 mm, Curved
3	411.060	SS	Osteotome with Fibre Handle-6 mm, Straight
4	411.061	SS	Osteotome with Fibre Handle-6 mm, Curved
5	411.100	SS	Osteotome with Fibre Handle- 10 mm, Straight
6	411.101	SS	Osteotome with Fibre Handle- 10 mm,Curved
7	411.120	SS	Osteotome with Fibre Handle- 12 mm, Straight
8	411.121	SS	Osteotome with Fibre Handle- 12 mm, Curved
9	411.150	SS	Osteotome with Fibre Handle- 15 mm, Straight
10	411.151	SS	Osteotome with Fibre Handle- 15 mm, Curved
11	411.180	SS	Osteotome with Fibre Handle- 18 mm, Straight
12	411.181	SS	Osteotome with Fibre Handle- 18 mm, Curved
13	411.200	SS	Osteotome with Fibre Handle- 20 mm, Straight
14	411.201	SS	Osteotome with Fibre Handle- 20 mm, Curved
15	411.240	SS	Osteotome with Fibre Handle- 24 mm, Straight
16	411.250	SS	Osteotome with Fibre Handle- 25 mm, Straight
17	411.251	SS	Osteotome with Fibre Handle- 25 mm, Curved
18	411.300	SS	Osteotome with Fibre Handle- 30 mm, Straight
19	411.301	SS	Osteotome with Fibre Handle- 30 mm, Curved

Osteotome with S.S Handle

#	Cat. No.	Metal	Sizes
1	412.060	SS	Osteotome with S.S Handle-6 mm, Straight
2	412.061	SS	Osteotome with S.S Handle-6 mm, Curved
3	412.080	SS	Osteotome with S.S Handle-8 mm, Straight
4	412.081	SS	Osteotome with S.S Handle-8 mm, Curved
5	412.120	SS	Osteotome with S.S Handle- 12 mm, Straight
6	412.121	SS	Osteotome with S.S Handle- 12 mm, Curved
7	412.130	SS	Osteotome with S.S Handle- 13 mm, Straight
8	412.150	SS	Osteotome with S.S Handle- 15 mm, STRAIGHT
9	412.151	SS	Osteotome with S.S Handle- 15 mm, Curved
10	412.175	SS	Osteotome with S.S Handle- 20 mm, STRAIGHT
11	412.180	SS	Osteotome with S.S Handle- 18 mm, Straight
12	412.181	SS	Osteotome with S.S Handle- 18 mm, Curved
13	412.201	SS	Osteotome with S.S Handle- 20 mm, Curved
14	412.240	SS	Osteotome with S.S Handle- 24 mm, Straight
15	412.241	SS	Osteotome with S.S Handle- 24 mm, Curved
16	412.250	SS	Osteotome with S.S Handle- 25 mm, Straight
17	412.300	SS	Osteotome with S.S Handle- 30 mm, Straight
18	412.301	SS	Osteotome with S.S Handle- 30 mm, Curved

Osteotome without Handle

#	Cat. No.	Metal	Sizes
1	001.850	SS	Osteotome withoutHandle- 8 mm, Straight
2	001.851	SS	Osteotome withoutHandle- 8 mm, Curved
3	001.854	SS	Osteotome withoutHandle- 12 mm, Straight
4	001.855	SS	Osteotome without Handle- 12 mm, Curved
5	001.856	SS	Osteotome without Handle- 15 mm, Straight
6	001.858	SS	Osteotome withoutHandle- 18 mm, Straight
7	001.859	SS	Osteotome without Handle- 18 mm, Curved
8	001.860	SS	Osteotome withoutHandle- 24 mm, Straight
9	001.861	SS	Osteotome withoutHandle- 24 mm, Curved
10	001.862	SS	Osteotome without Handle- 25 mm, Straight
11	001.862A	SS	Osteotome without Handle- 20 mm, Straight
12	001.864	SS	Osteotome withoutHandle- 30 mm, Straight
13	001.865	SS	Osteotome withoutHandle- 30 mm, Curved

Patella Holding Forcep

#	Cat. No.	Metal	Sizes
1	406.150	SS	Patella Holding Forcep- 150MM
2	406.175	SS	Patella Holding Forcep- 175mm
3	406.190	SS	Patella Holding Forcep- 190mm
4	406.210	SS	Patella Holding Forcep- 210mm
5	406.240	SS	Patella Holding Forcep- 240mm

Pelvic Reduction Forceps

#	Cat. No.	Metal	Sizes
1	398.550	SS	Pelvic Retractor Blunt - 250MM
2	398.730	SS	Pelvic ReductionForceps Asymmetrc/Uneven - 400MM With Pointed Ball Tip
3	398.742	SS	Pelvic Reduction Forceps For ScrewWith Speed Lock300 mm
4	398.744	SS	Pelvic Reduction Forceps For ScrewWith Speed Lock350 mm
5	398.840	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Curved 200 mm
6	398.850	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Curved 250 mm
7	398.852	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Curved 400 mm
8	398.860	SS	Pelvic Reduction Forceps Oblique With Pointed Ball Tip Speed Lock Straight 400 mm
9	398.862	SS	Pelvic Reduction Forceps Oblique With Pointed Ball Tip Speed Lock Straight 250 mm
10	398.864	SS	Pelvic ReductionForceps Oblique With Pointed Ball Tip Speed Lock Straight 200 mm
11	398.870	SS	Pelvic Reduction Forceps With 3 Pointed Ball Tip Speed Lock400 mm
12	398.880	SS	Pelvic Reduction Forceps For Screw Adjustable For 4.5 MM -350 mm
13	398.882	SS	Pelvic Reduction Forceps For Screw Adjustable For 3.5 MM -350 mm

Periosteal Elevators with Fibre Handle

#	Cat. No.	Metal	Sizes
1	417.006	SS	Periosteal Elevators with Fibre Handle- Straight, 06mm
2	417.008	SS	Periosteal Elevators with Fibre Handle- Straight, 08mm
3	417.010	SS	Periosteal Elevators with Fibre Handle- Straight, 10mm
4	417.012	SS	Periosteal Elevators with Fibre Handle- Straight, 12mm
5	417.020	SS	Periosteal Elevators with Fibre Handle- Straight, 20mm
6	417.106	SS	Periosteal Elevators with Fibre Handle- Curved, 06mm
7	417.108	SS	Periosteal Elevators with Fibre Handle- Curved, 08mm
8	417.118	SS	Periosteal Elevators with Fibre Handle- Curved, 18mm
9	417.120	SS	Periosteal Elevators with Fibre Handle- Curved, 20mm

Rongeur

#	Cat. No.	Metal	Sizes
1	438.020	SS	Up Cutting Rongeur- Ø 2.0 mm
2	438.025	SS	Up Cutting Rongeur- Ø 2.5 mm
3	438.030	SS	Up Cutting Rongeur- Ø 3.0 mm
4	438.040	SS	Up Cutting Rongeur- Ø 4.0 mm
5	438.120	SS	Down Cutting Rongeur- Ø 2.0 mm
6	438.125	SS	Down Cutting Rongeur- Ø 2.5 mm
7	438.130	SS	Down Cutting Rongeur- Ø 3.0 mm
8	438.140	SS	Down Cutting Rongeur- Ø 4.0 mm

Self Centering Bone Holding Forcep

#	Cat. No.	Metal	Sizes
1	405.150	SS	Self Centering Bone Holding Forcep- 150 mm
2	405.170	SS	Self Centering Bone Holding Forcep- 170 mm
3	405.175	SS	Self Centering Bone Holding Forcep- 175 mm
4	405.190	SS	Self Centering Bone Holding Forcep- 190 mm
5	405.200	SS	Self Centering Bone Holding Forcep- 200 mm
6	405.240	SS	Self Centering Bone Holding Forcep- 240 mm
7	405.260	SS	Self Centering Bone Holding Forcep- 260 mm
8	405.270	SS	Self Centering Bone Holding Forcep- 270 mm
9	405.280	SS	Self Centering Bone Holding Forcep- 280 mm

Skull Traction (Semi Lunar Shape)

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	440.150	SS	Skull Traction (Semi Lunar Shape)

Steffee Instruments

#	Cat. No.	Metal	Sizes
1	417.104	SS	Steffee Compression Distraction Device with Tomybar
2	890.308	SS	Steffee Spanner- 8.0mm
3	890.311	SS	Steffee Spanner- 11.0mm
4	890.314	SS	Steffee Tap - 4.5 mm
5	890.315	SS	Steffee Tap - 5.5 mm
6	890.325	SS	Steffee Screw Intrroducer
7	890.332	SS	Steffee Awl

Flexible Reamer Cap

#	Cat. No.	Metal	Sizes
1	442.065	SS	Flexible Reamer Cap - Ø 6.5 mm
2	443.105	SS	Flexible Reamer Cap Box Empty
3	444.060	SS	Flexible Reamer Cap - Ø 6.0 mm
4	444.070	SS	Flexible Reamer Cap - Ø 7.0 mm
5	444.100	SS	Flexible Reamer Cap - Ø 10.0 mm
6	444.105	SS	Flexible Reamer Cap - Ø 10.5 mm
7	444.110	SS	Flexible Reamer Cap - Ø 11.0 mm
8	444.115	SS	Flexible Reamer Cap - Ø 11.5 mm
9	444.120	SS	Flexible Reamer Cap - Ø 12.0 mm
10	444.125	SS	Flexible Reamer Cap - Ø 12.5 mm
11	444.130	SS	Flexible Reamer Cap - Ø 13.0 mm
12	444.135	SS	Flexible Reamer Cap - Ø 13.5 mm
13	444.140	SS	Flexible Reamer Cap - Ø 14.0 mm
14	444.145	SS	Flexible Reamer Cap - Ø 14.5 mm
15	444.150	SS	Flexible Reamer Cap - Ø 15.0 mm
16	444.160	SS	Flexible Reamer Cap - Ø 16.0 mm
17	444.170	SS	Flexible Reamer Cap - Ø 17.0 mm
18	444.175	SS	Flexible Reamer Cap - Ø 7.5 mm
19	444.180	SS	Flexible Reamer Cap - Ø 8.0 mm
20	444.185	SS	Flexible Reamer Cap - Ø 8.5 mm
21	444.190	SS	Flexible Reamer Cap - Ø 9.0 mm
22	444.195	SS	Flexible Reamer Cap - Ø 9.5 mm
23	GS0093	SS	Flexible Reamer Cap Set With Box

CLIP

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	440.100	SS	TOWEL CLIP

K. Nail Driver

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	890.430	SS	K. Nail Driver

Enders Nails Instruments

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	915.015	SS	Enders Nail Twister

Femoral Distractor with Tomybar Medium

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.101	SS	Femoral Distractor with Tomybar Medium

Femoral Distractor with Tomybar Small

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	417.100	SS	Femoral Distractor with Tomybar Small

Kerrison Punch

#	Cat. No.	Metal	Sizes
1	438.240	SS	Kerrison Punch 40° angle- 2.0mm Up Cutting
2	438.241	SS	Kerrison Punch 40° angle- 2.5mm Up Cutting
3	438.242	SS	Kerrison Punch 40° angle- 3.0mm Up Cutting
4	438.340	SS	Kerrison Punch 40° angle- Down Cutting
5	438.341	SS	Kerrison Punch 40° angle- Down Cutting
6	438.342	SS	Kerrison Punch 40° angle- Down Cutting

Drill Bit- Coupling End, L- 300mm

#	Cat. No.	Metal	Sizes
1	427.235	SS	Drill bit Ø 3.2mm x 300 mm- Coupling End
2	427.240	SS	Drill bit Ø 4.0mm x 300 mm- Coupling End

I.L Nailing Instruments

#	Cat. No.	Metal	Sizes
1	903.100	SS	PROXIMAL COMBINED JIG FOR TIBIA/FEMUR
2	903.105	SS	INSERTION DRIVING HEAD
3	903.110	SS	RAM
4	903.115	SS	RAM ROD
5	903.120	SS	WRENCH 17.0mm
6	903.122	SS	Nail connecting Bolt Tibia / Femur , PFN
7	903.125	SS	PROTECTION SLEEVE Ø 10.0 X 8.0MM
8	903.130	SS	DRILL SLEEVE Ø 8.0 X 4.0 MM
9	903.135	SS	TROCAR Ø 8.0MM
10	903.145	SS	TISSUE PROTECTOR
11	903.155	SS	GUIDE WIRE HOLDER
12	903.170	SS	ALUMINIUM BOX WITH TRAY FOT TIBIA / FEMUR INSTRUMENTS
13	903.175	SS	NAIL/ DRILL GUIDE BAR FOR TIBIA / FEMUR DISTAL JIG- OPTIONAL
14	903.180L	SS	DRILL GUIDE BAR FOR TIBIA / DISTAL JIG - LEFT- OPTIONAL
15	903.180R	SS	DRILL GUIDE BAR FOR TIBIA / DISTAL JIG RIGHT- OPTIONAL
16	903.190L	SS	DRILL GUIDE BAR FOR FEMUR/ DISTAL JIG LEFT- OPTIONAL
17	903.190R	SS	DRILL GUIDE BAR FOR FEMUR/ DISTAL JIG RIGHT- OPTIONAL
18	903.205	SS	WIRE SLEEVE Ø 8.0 X 1.8MM
19	903.225	SS	PLASTIC MEDULLARY NAIL (TEFLON ROD)
20	909.117	SS	WIRE SLEEVE Ã 8 X 2.5 MM SHORT FOR PFN
21	909.126	SS	Nail connecting Bolt FOR EXPERT A2FN NAILS

PFN Jig

#	Cat. No.	Metal	Sizes
1	909.001	SS	PFN JIG 135*
2	909.002	SS	EXPERT A2FN JIG 130*
3	909.100	SS	PFN Jig 130*

Spine Distractor

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	700.020	SS	GREENS DISTRACTOR

Maxillofacial System Box

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	600.000	SS	Maxillofacial system empty box

ACL Drill

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	906.140	SS	EYELET DRILL 2.5MM

Spine Instruments

#	Cat. No.	Metal	Sizes
1	1633.075	SS	Socket Wrench 11.0MM For Transvers Connector
2	446.045	SS	Spine Rod Cutter
3	446.046	SS	MESH PLATE CUTTER
4	446.048	SS	GREENS SPINE PERSUADER
5	900.637	SS	Polyaxial Screw Driver For 5.5MM Spine System
6	900.640	SS	ROD FORK
7	900.731	SS	GREENS FUNNEL (Imported)

Aluminum Box

#	Cat. No.	Metal	Sizes
1	1601.212	SS	LCP 3.5MM INSTRUMENTS BOX
2	1601.312	SS	LCP 5.0MM INSTRUMENTS BOX
3	910.501	SS	ALUMINUM SCREW BOX FOR 2.7 / 3.5MM SCEW
4	910.502	SS	ALUMINUM SCREW TRAY FOR 2.7 / 3.5MM SCEW
5	910.503	SS	ALUMINUM SCREW TRAY FOR 3.5 / 5.0MM SCEW
6	GS00100	SS	PELVIC IMPLANTS BOX
7	GS0052	SS	BOX FOR LARGE FRAGMENTS INSTRUMENTS FOR LF RETELIER SCREWS
8	GS0069	SS	2.4/3.5/4.5MM COMBINED SCREW BOX
9	GS0070	SS	LARGE CANNULATED SYSTEM BOX
10	GS0071	SS	2.4/3.5/4.0MM COMBINED SCREW BOX
11	GS0072	SS	LCP 2.4/3.5MM IMPLANTS AND INSTRUMENTS BOX FOR DISTAL RADIUS
12	GS0091	SS	BOX FOR TUBULAR EXTERNAL FIXATOR

Nail Extractor Instruments System

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	903.216	SS	Nail Extractor Instruments System

Enders Nail Set With Box

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	915.029	SS	Enders Nail Set With Box

Other Instruments

#	Cat. No.	Metal	Sizes
1	467.375	SS	GUIDE WIRE FOR PFN Ø 2.5MM
2	900.666	SS	Posterior-Cervical Plate Holder
3	900.667	SS	Posterior-Cervical Plate Bender
4	900.668	SS	Drill Guide
5	900.669	SS	3N.M Torque Wrench
6	900.670	SS	Counter-Torque Wrench
7	900.671	SS	Posterior-Cervical Hex-Wrench
8	900.672	SS	Multi-Axial Screw Wrench
9	900.673	SS	Single-Axial Screw Wrench
10	900.674	SS	Preloaded Wrench
11	900.675	SS	Drill
12	900.676	SS	Posterior Cervical Rod Holder
13	900.677	SS	Posterior Cervical Hook Holder
14	900.678	SS	Lamina Detacher
15	900.679	SS	Internal Rod Bender
16	900.680	SS	Posterior Cervical Open Drill
17	900.681	SS	Posterior Cervical Tap
18	900.683	SS	Posterior Cervical Expanding Awl
19	900.684	SS	Cervical Positioning-Pin Sleeve
20	900.685	SS	Posterior Cervical Rod Pusher
21	900.686	SS	Depth Gauge
22	900.687	SS	Posterior Cervical Compressor
23	900.688	SS	Posterior Cervical Distractor
24	900.689	SS	Posterior Cervical Rod Breaker
25	900.690	SS	Template ??3?
26	900.691	SS	Probe
27	900.692	SS	General Handle
28	900.693	SS	Positioning Pin
29	900.694	SS	Hook Deliver
30	900.695	SS	Posterior Cervical Screw Holder
31	900.696	SS	Occipital Screw Tap
32	903.105	SS	DRIVING HEAD
33	903.123	SS	INSERTION / EXTRACTOR
34	903.124	SS	SLOTTED HAMMER
35	903.126	SS	EXTRACTOR ROD
36	903.501	SS	Expert Tibia Nail Jig
37	903.502	SS	NAIL CONNECTING BOLT FOR EXPERT TIBIA NAIL
38	903.503	SS	PROTECTION SLEEVE 10.0 X 8.0 MM
39	903.504	SS	DRILL SLEEVE 8.0 X 4.0 MM
40	903.505	SS	TROCAR 8.0 MM
41	904.105	SS	COMPRESSION DEVICE FOR UHN
42	904.115	SS	COMPRESSION CONNECTING SCREW SOLID
43	904.120	SS	COUNPLING BLOCK FOR UHN EXTRACTION
44	904.125	SS	INSERT / EXTRACTOR FOR UHN
45	904.140	SS	PROTECTION SLEEVE 11.0 X 8.0 MM
46	904.145	SS	DRILL SLEEVE 8.0 X 2.7 MM
47	904.150	SS	TROCAR 8.0 MM
48	904.155	SS	PROJECTILE REAMER(COUPLING END)
49	904.160	SS	COMBINATION WRENCH
50	904.165	SS	ALUMINIUM BOX WITH TRAY
51	904.175	SS	CONNECTING SCREW FOR UHN CANULETED
52	909.105	SS	PROTECTION SLEEVE Ø 12 X 10 MM
53	909.110	SS	PROTECTION SLEEVE Ø 10 X 08 MM
54	909.115	SS	WIRE SLEEVE Ø 8 X 2.5 MM
55	909.116	SS	WIRE SLEEVE Ø 10 X 2.5 MM
56	909.120	SS	TROCAR Ø 8.0 MM
57	909.125	SS	NAIL CONNECTING BOLT FOR PFN
58	909.135	SS	HEXAGONAL POLYAXIAL WRENCH Ø 8 MM
59	909.140	SS	TROCAR 4.0 MM
60	909.140	SS	DRILL SLEEVE Ø 8 X 4.0 MM
61	909.145	SS	PROTECTION SLEEVE FOR TROCHANTERIC REAMER-SOLAPUR TYPE
62	909.150	SS	CANNULATED/TROCHANTERIC REAMER WITH T-HANDLE Ø 15.0 MM
63	909.162	SS	HIP PIN CANNULATED TAP 6.2MM
64	909.164	SS	FEMORAL NECK CANNULATED TAP 8.0MM
65	909.170	SS	Trocar Ø 10 MM

BLOCK FOR LOCKING PLATE

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

V.A DISTAL RADIUS BOX

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	GS0008	SS	V.A DISTAL RADIUS BOX

CMF Micro/Mini Plate Instruments

#	Cat. No.	Metal	Sizes
1	446.701	SS	GREENS CMF REDUCTION FORCEPS
2	446.702	SS	GREENS CMF MODELING LEVER
3	446.703	SS	GREENS CMF PLATE PLIER
4	446.704	SS	GREENS CMF PLATE BENDER
5	446.705	SS	GREENS CMF PLATE CUTTER T.C. TIP
6	446.706	SS	GREENS CMF SMALL FREGMENT REDUCTION FORCEPS SERRATED
7	446.707	SS	GREENS CMF SMALL FREGMENT SELF CENTERING FORCEPS

JEWETT NAIL PLATES INSTRUMENTS

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

Granules

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

K. WIRE CONTAINER

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.

SAMPLE BAG

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	GS0090	SS	SAMPLE BAG

KUNTCHNER NAILS INSTRUMENTS SYSTEM

#	Cat. No.	Metal	Sizes	Stock	Purchase Qty.
1	GS0092	SS	KUNTCHNER NAILS INSTRUMENTS SET

Cannulated Reamer (T-Handle) Ø 25 inch

#	Cat. No.	Metal	Sizes
1	434.128	SS	Cannulated Reamer 25"(T-Handle) Ø 8 mm
2	434.129	SS	Cannulated Reamer 25"(T-Handle) Ø 9 mm
3	434.130	SS	Cannulated Reamer 25"(T-Handle) Ø 10 mm
4	434.131	SS	Cannulated Reamer 25"(T-Handle) Ø 11 mm
5	434.132	SS	Cannulated Reamer 25"(T-Handle) Ø 12 mm

Drill Bit Coupling End 100 mm

#	Cat. No.	Metal	Sizes
1	1613.005	SS	Drill Bit Ø 1.5mm x 100 mm- Coupling End
2	1613.008	SS	Drill Bit Ø 1.8 mm x 100 mm- Coupling End
3	1613.010	SS	Drill Bit Ø 2.0mm x 100 mm- Coupling End
4	1613.015	SS	Drill Bit Ø 2.5mm x 100 mm- Coupling End
5	1613.017	SS	Drill Bit Ø 2.7mm x 100 mm- Coupling End
6	1613.018	SS	Drill Bit Ø 2.8mm x 100 mm- Coupling End
7	1613.022	SS	Drill Bit Ø 3.2mm x 100 mm- Coupling End
8	1613.025	SS	Drill bit Ø 3.5mm x 100 mm- Coupling End
9	1613.030	SS	Drill bit Ø 4.0mm x 100 mm- Coupling End
10	1613.033	SS	Drill bit Ø 4.3mm x 100 mm- Coupling End
11	1613.035	SS	Drill bit Ø 4.5mm x 100 mm- Coupling End

Drill bit 145 mm- Coupling End

#	Cat. No.	Metal	Sizes
1	1313.230	SS	Drill bit Ø 4.0mm x 145 mm- Coupling End
2	1613.205	SS	Drill Bit Ø 1.5mm x 145 mm- Coupling End
3	1613.208	SS	Drill Bit Ø 1.8 mm x 145 mm- Coupling End
4	1613.210	SS	Drill Bit Ø 2.0mm x 145 mm- Coupling End
5	1613.215	SS	Drill Bit Ø 2.5mm x 145 mm- Coupling End
6	1613.217	SS	Drill Bit Ø 2.7mm x 145 mm- Coupling End
7	1613.222	SS	Drill Bit Ø 3.2mm x 145 mm- Coupling End
8	1613.225	SS	Drill bit Ø 3.5mm x 145 mm- Coupling End
9	1613.233	SS	Drill bit Ø 4.3mm x 145 mm- Coupling End
10	1613.235	SS	Drill bit Ø 4.5mm x 145 mm- Coupling End

Drill Bit 110 mm- Coupling End

#	Cat. No.	Metal	Sizes
1	1613.055	SS	Drill Bit Ø 1.5mm x 110 mm- Coupling End
2	1613.058	SS	Drill Bit Ø 1.8 mm x 110 mm- Coupling End
3	1613.060	SS	Drill Bit Ø 2.0mm x 110 mm- Coupling End
4	1613.065	SS	Drill Bit Ø 2.5mm x 110 mm- Coupling End
5	1613.067	SS	Drill Bit Ø 2.7mm x 110 mm- Coupling End
6	1613.068	SS	Drill Bit Ø 2.8mm x 110 mm- Coupling End
7	1613.072	SS	Drill Bit Ø 3.2mm x 110 mm- Coupling End
8	1613.075	SS	Drill bit Ø 3.5mm x 110 mm- Coupling End
9	1613.080	SS	Drill bit Ø 4.0mm x 110 mm- Coupling End
10	1613.083	SS	Drill bit Ø 4.3mm x 110 mm- Coupling End
11	1613.085	SS	Drill bit Ø 4.5mm x 110 mm- Coupling End

Drill bit 115 mm- Coupling End

#	Cat. No.	Metal	Sizes
1	1613.105	SS	Drill Bit Ø 1.5mm x 115 mm- Coupling End
2	1613.108	SS	Drill Bit Ø 1.8 mm x 115 mm- Coupling End
3	1613.110	SS	Drill Bit Ø 2.0mm x 115 mm- Coupling End
4	1613.115	SS	Drill Bit Ø 2.5mm x 115 mm- Coupling End
5	1613.117	SS	Drill Bit Ø 2.7mm x 115 mm- Coupling End
6	1613.118	SS	Drill Bit Ø 2.8mm x 115 mm- Coupling End
7	1613.122	SS	Drill Bit Ø 3.2mm x 115 mm- Coupling End
8	1613.125	SS	Drill bit Ø 3.5mm x 115 mm- Coupling End
9	1613.130	SS	Drill bit Ø 4.0mm x 115 mm- Coupling End
10	1613.133	SS	Drill bit Ø 4.3mm x 115 mm- Coupling End
11	1613.135	SS	Drill bit Ø 4.5mm x 115 mm- Coupling End