Bone Plates - Non Locking

This is implant of choice for fix of forearm and may be also used for distal humeral fractures and the clavicle.

Bone Plates - Non Locking Products

Straight Reconstruction Plates- 1.6 mm Thick, 3.5mm Screws

Reconstruction Plate Straight is used to fix Diaphysis Noncomminuted (Spiral, Oblique or Transverse) and Diaphysis Wedge (Spiral, Bending or Comminuted) fractures of metacarpals and metatarsals. All holes of the plate supports 2.7 mm Cortical screws.

Straight Reconstruction Plates- 3.5mm Screws

Straight Reconstruction Plates- 1.6 mm Thick, 4.5mm Screws

Reconstruction Plates Straight are primarily indicated for reconstruction of the pelvis. It is also indicated for condylar, metaphyseal or diaphyseal fractures of small and long bones. The side cuts of these plates allow three dimensional contouring.

Dynamic Compression Plate (DCP) for 2.7mm Screws

Dynamic Compression Plate is used for Diaphysis Noncomminuted (Spiral, Oblique or Transverse) and Diaphysis Wedge (Spiral, Bending or Comminuted) fractures of Metacarpals and Metatarsals.

Small DCP for 3.5mm Screws

These plates are indicated for fixation of fractures and nonunions of the Clavicle, Scapula, Olecranon, Humerus, Radius, Ulna, Pelvis, Distal tibia, and Fibula.

Narrow DCP for 4.5mm Screws

Narrow Dynamic Compression Plate. These plates are indicated for fixation of various long bones, such as the humerus, tibia and femur. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of nonunions or malunions in adult patients.

Broad DCP for 4.5mm Screws

Broad Dynamic Compression Plate. These plates are indicated for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of non-unions and malunions in adult patients.

Dcp Small Hook Plate for 3.5 mm Screws

Dcp Small Hook Plate for 3.5 mm Screws Dcp Small Hook Plate For olecranon fracture.

Cobra Plate for 4.5 mm & 6.5 mm Screws

Cobra Plate for Arthrodesis of the hip fracture.

Calcaneal Plates for 3.5mm Screws

Calcaneal Plate for 3.5mm Screws is used for Nonarticular body fractures (Noncomminuted and Comminuted) and Articular fractures involving posterior facet of Calcaneus bone.

Dynamic Compression Plates (LC-DCP Small) for 3.5 mm Screws

These plates are indicated for fixation of fractures and nonunions of the Clavicle, Scapula, Olecranon, Humerus, Radius, Ulna, Pelvis, Distal tibia, and Fibula.The oval shaped hole is designed to creat dynamic pressure between the fractured bone fragments.

Dynamic Compression Plates (LC-DCP Narrow) for 4.5 mm Screws

Narrow Dynamic Compression Plates are indicated for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of nonunions and malunions in adult patients.The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.

Dynamic Compression Plates (LC-DCP Broad) for 4.5 mm Screws

Broad Dynamic Compression Plates are indicated for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of non-unions and malunions in adult patients.The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.

DHS Barrel Plate with Round Hole 125°- Long (Barrel length- 38mm)

Dynamic Hip Compression Plates (with Dynamic Compression Holes). These plates are indicated for Pertrochanteric fractures, Intertrochanteric fractures and Basilar neck fractures.

DHS Barrel Plate with Round Hole 130°- Long (Barrel length- 38mm)

Dynamic Hip Compression Plates (with Dynamic Compression Holes). These plates are indicated for Pertrochanteric fractures, Intertrochanteric fractures and Basilar neck fractures.

DHS Barrel Plate with Round Hole 130°- Short (Barrel length- 25mm)

Dynamic Hip Compression Plates (with Dynamic Compression Holes). These plates are indicated for Pertrochanteric fractures, Intertrochanteric fractures and Basilar neck fractures.

DHS Barrel Plate with Round Hole 135°- Long (Barrel length- 38mm)

Dynamic Hip Compression Plates (with Dynamic Compression Holes). These plates are indicated for Pertrochanteric fractures, Intertrochanteric fractures and Basilar neck fractures.

DHS Barrel Plate with Round Hole 135°- Short (Barrel length- 25mm)

DHS Barrel Plate with Round Hole 135º- Short (Barrel length- 25mm) Description

DHS Barrel Plate with DCP Hole-AO type, 125°- Long (Barrel length- 38mm)

The Dynamic Hip Plate offered by us has been designed for providing strong and stable internal fixation for various applications in intertrochanteric, subtrochanteric and basilar neck fractures, while causing minimal soft tissue irritation.

DHS Barrel Plate with DCP Hole-AO type, 125°- Short (Barrel length- 25mm)

DHS Barrel Plate with DCP Hole AO type, 130°- Long (Barrel length- 38mm)

DHS Barrel Plate with DCP Hole AO type, 130°- Short (Barrel length- 25mm)

DHS Barrel Plate with DCP Hole AO type, 135°- Long (Barrel length- 38mm)

DHS Barrel Plate with DCP Hole AO type, 135°- Short (Barrel length- 25mm)

DHS Barrel Plate with DCP Hole AO type, 140°- Long (Barrel length- 38mm)

DHS Barrel Plate with DCP Hole AO type, 140°- Short (Barrel length- 25mm)

Osteotomy Barrel Plates- 110°

Osteotomy Barrel Plates use in Neglected fracture neck femur where Intertrochanteric osteotomy required.

Osteotomy Barrel Plates- 120°

Osteotomy Barrel Plates use in Neglected fracture neck femur where Intertrochanteric osteotomy required.

DCS Barrel Plate 95° with DCP Holes

DCS Barrel plates For Femur Condylar Fractures.We manufacturer and export 95° DCS Barrel Locking Plate DCP.(Stainless Steel & Titanium)

Quarter Tubular Plates for 2.7 mm Screws

Quarter Tubular Plate used for Diaphysis Noncomminuted (Spiral, Oblique or Transverse), Diaphysis Wedge (Spiral, Bending or Comminuted) and Diaphysis Comminuted (Segmental or Complex comminuted) fractures of Metacarpals and Metatarsals.All holes of the plate support 2.7 mm Cortical screws.

One Third (1/3rd) Tubular Plates for 3.5 mm Screws

One Third Tubular Plate is used to fix Lateral Malleolar fracture, Distal Ulnar fracture and Olecranon fracture.The plate neutralizes any shearing or bending force which could disrupt an unprotected lag screw fixation.The plate holes support 3.5mm cortex and 4.0mm cancellous or cannulated screws.

Half Tubular Compression Plate (Semi Tubular Plate) for 3.5 mm Screws

Semi-Tubular Plates for primarly indicated for areas of low stress such as forearm-radius, and are also recommended for the fractures of fibula.Compression is applied by eccentric positioning of the screws against the side of the screw hole furthest from the fracture line.Use 3.5 mm cortical screws and cancellous screws for the fixation.

Half Tubular Compression Plate (Semi Tubular Plate) for 4.5 mm Screws

Semi-Tubular Plates for primarly indicated for areas of low stress such as forearm-radius, and are also recommended for the fractures of fibula.Compression is applied by eccentric positioning of the screws against the side of the screw hole furthest from the fracture line.Use 4.5 mm cortical screws and cancellous screws for the fixation.

Y- Reconstruction Plates for Humeral Condyles

Y-Reconstruction Plates are used for the fractures of Distal Humerus. Side cuts on these plates make them more flexible. All holes of the plate allow 3.5 mm cortex screws.

Small T- Plate- Right Angle for 3.5mm Screw

These plates are indicated for the Extra-articular, Partial articular and Complete articular fractures of Disal Radius. All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

Small T- Plate- Oblique Angle (Left & Right Combined)

These plates are indicated for Extra-articular, Partial articular and Complete articular fractures of Disal Radius.These plates are designed separately designed for left and right hand. All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous Screws.

T- Buttress Plates for 4.5/ 6.5 mm Screws

T-Buttress Plate for the lateral plateau fracture of the tibia.It is designed to be used as a buttress plate in areas of thin metaphyseal cortical bone or to prevent the collapsing during the treatment of cancellous defects in that area.Prior to the surgery the plate may be bent to accurately match the anatomy of the segment of bone to be fixed.The long oval hole is provided for temporary fixation of the plate prior to final adjustment and fixation.Holes of the plate allow 4.5 mm cortex screws.

L- Buttress Plates for 4.5/ 6.5 mm Screws

L-Buttress Plate for the fracture of the tibia With double bend, as buttress for tibial and humeral head fractures.

Lateral Tibial Head Buttress Plates 4.5 mm

Lateral Tibial Head Buttress Plate indicated for treating shaft fractures, metaphyseal fracture, intra-articular and periprosthetic fractures of proximal tibia.Low Contact plate design reduces the plate and bone contact, this feature reduces vascular trauma.

Hip Plates for Intertrochanteric Femoral Osteotomies- 90°

Intertrochanteric osteotomy alters the biomechanical environment of the fracture site and enhances fracture union.

Hip Plates for Intertrochanteric Femoral Osteotomies- 120°

Intertrochanteric femoral osteotomies Non-union of femoral neck fractures may occur due to mechanical and biological actors.intertrochanteric osteotomy alters hip biomechanics and enhances fracture union. The double-angled 120° plate is usually used for internal fixation of the osteotomy.

Condylar Blade Plate 95° for Adults

Condylar Blade Plate As buttress for the femoral condyles with multiple fragment fractures.

Condylar Buttress Plate 4.5 for Left Femoral Condyles

Condylar Butresss Plate use in six fresh-frozen human knee specimens, segmental osteotomies were created to mimic supracondylar femoral fractures. The medial cortex was completely removed to make the fracture unstable to varus deformity. The fracture was fixed with a lateral condylar buttress plate using 4.5 mm screws.

Cloverleaf Plates

Cloverleaf Plate is indicated for the fracture of Proximal Humerus and Distal Tibia. The Safety locking feature provides angular stability.All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

Washers

Washers are indicated for use with 4.5 mm to 7.0 mm large screws and are required when screw head is to fix upon large surfacces.

Pelvic Reconstruction Plate Low Profile (S.S.) A.O Type - J Plate

The comprehensive solution for pelvic fracture fixation.Pelvic Reconstruction Plate System are intended for pelvic and acetabular reconstructive surgery. Additional implant tray for Low Profile 3.5 Reconstruction J-Plate Set. J-Plates are precontoured to fit the pelvic brim.

Quadrilateral Surface Plate 3.5 Low Profile

The Greens 3.5 mm Quadrilateral Surface Plates are indicated for quadrilateral surface comminution associated with acetabular fractures when used in conjunction with Greens Pelvic Reconstruction Plates.

The Greens 3.5 mm Quadrilateral Surface Plates are part of the 3.5 mm Low Profile Pelvic System, which offers implants and instruments for pelvic and acetabular reconstructive surgery.

Spring Plate 3.5

Spring Plates Reduction and fixation of small bone fragments.Spring Plate is intended for pelvic and acetabular reconstructive surgery and fracture fixation of thedistal fibula.