Bone Plates - Locking

Locking plates for fixation of fractures, osteotomies, nonunions, replantations, and fusions of small bones and small bone fragments, particularly in osteopenic bone. Examples include, but are not limited to, the hand, wrist, foot and ankle. And Screws are Angular stable fixation of fragments regardless of bone quality.Reduced impairment of periosteal blood supply due to the limited plate-bone contact.

Bone Plates - Locking Products

LC-LCP Clavicle Hook Plate

Lc-Lcp Clavicle Hook Plate is indicated for Extra-articular and Intra-articular fractures of Lateral Clavicle ends with dislocations of Acromioclavicular joint.

VA-LCP ANTERIOR CLAVICLE PLATE 2.7/3.5

LCP Superior Anterior Clavicle Plate With Lateral Extension 2.7 / 3.5 mm

LCP Superior Anterior Clavicle Plate 3.5mm Left/right

The anatomically precontoured fixation system with angular stability for lateral clavicle and clavicle shaft.

LCP Two - Column Volar Distal Radius Plate 2.4mm, Variable Angle

These plates Fixation of complex intra- and extra- articular fractures and osteotomies of the distal radius and other small bones.

LCP DISTAL FIBULA PLATE 2.7 MM / 3.5 MM

LCP Distal Fibula Plates The 2.7 mm/3.5 mm are part of the GREENS LCP System that merges locking screw technology with conventional plating techniques.
The plates are available in stainless steel and in Titanium and are anatomically contoured for the lateral and posterolateral aspect of the distal fibula.

LCP Varaible Angle Proximal Tibia Plate

LCP Varaible Angle Distal Femur Plate

LCP LONG PHILOS PLATE

LCP SHORT PHILOS PLATE

LC-LCP Locking Proximal Humerus Plates(LPHP) Ø 3.5mm

Lc-LCP Proximal Humerus Plate is indicated for fractures and fracture dislocations, osteotomies and nonunions of the proximal humerus, particularly for patients with osteopenic bone.

LCP EXTRA ARTICULAR DISTAL HUMERUS PLATE.

The 3.5 mm LCP Extra Articular Distal Humerus Plate is indicated for fractures of the distal humerus.

3.5 mm LCP Medial Distal Tibia Plate(WITH TAB)

LCP Medial Distal Tibia Safety Lock Plate with Tab is indicated for Extra-articular, Partial articular and Complete articular complex or simple fracture of distal tibia.These Plates can be anatomically contoured to match with the Distal Medial Tibia.These plates are designed for both right and left tibia and are available in a variety of lengths.

LCP Medial Distal Tibia Plates 3.5 (Without Tab)

Lcp medial distal tibia plate is indicated for Extra-articular, Partial articular and Complete articular complex or simple fracture of distal tibia.These Plates can be anatomically contoured to match with the Distal Medial Tibia.

LCP Dorsolateral Lower Humerus Plate With Lateral Extension 3.5 mm

Lcp Dorsolateral lower Humerus Plate is primarily used for the fixation of fractures of Distal Lateral Condyle. It can also be used for Distal Extra-articular Metaphyseal simple and Distal Partial Articular Lateral Sagittal fractures of Humerus.Anatomically shaped plate fits over the Lateral Condyle of the Humerus from Dorsal side.

LCP Anterolateral Distal Tibia Plates 3.5mm

Lcp Anterolateral Distal Tibial Plate is indicated for temporary internal fixation and stabilization of osteotomies and fractures, including Comminuted fractures, Supracondylar fractures, Intra-articular and extra-articular condylar fractures, Fractures in osteopenic bone, Nonunions and Malunions.

LC-LCP Metaphysial Plate for Ø 3.5/ 4.5/ 5.0mm

This plate is indicated for distal tibial and proximal humeral fractures. Metaphyseal Safety Lock Plate 3.5/4.5/5.0mm, Broad is used for the fixation of metaphyseal fractures of various long bones, excluding the Femur. It is also used in fixation of Osteopenic bone and fixation of Nonunions and Malunions.

LCP PERIARTICULAR PROXIMAL HUMERUS PLATE

LC-LCP Distal Femoral Plate for Ø 4.5 / 5.0mm

Lc-Lcp Distal Femoral Plates are indicated for Intra-articular and Supracondylar fractures. These plates are also indicated for Diaphyseal fractures in combination with Intra-articular or/and Supracondylar fractures of Distal Femur.Anatomically designed plate fits over distal femur from lateral side.

Locking Upper Tibial Plate for Ø 4.5/5.0mm

Locking Upper Tibial Plates are indicated for fixation of fractures in the tibia.

LCP DISTAL RADIUS T - PLATE - EXTRA LONG

LCP DISTAL RADIUS L - PLATE - DORSAL PLATES

LCP Olecranon Plates 3.5

LCP Olecranon Plates are indicated for fixation of fractures, osteotomies and nonunions of the olecranon, particularly in osteopenic bone.

LCP VOLAR DISTAL RADIUS PLATE, EXTRA ARTICULAR

LC-LCP Cloverleaf Plate for Ø 3.5mm

These plates are indicated for the fractures of Proximal Humerus and Distal Tibia.One or both shoulders of the Cloverleaf Plate can be cut off with large Wire Cutter.

High Tibial Osteotomies Locking Plate

LCP PROXIMAL Tibia Plate 3.5

$Dr.Vinay\\\'s Distal Condylar Humeral locking Y Plate$

Dr.Vinay\\\'s Distal Condylar Humeral locking Y Plate

Dr.Vinay's distal condylar humeral locking Y Plates are used for the fractures of Distal Humerus.

LC-LCP Small Plate for Ø 3.5mm

This lc-lcp small plate indicated for the Extra-articular, Partial articular and Complete articular fractures of Disal Radius.All holes of the plate allow 3.5 mm cortical and 4.0 mm cancellous screws.

LC-LCP Narrow Plate for Ø 4.5 / 5.0 mm

These lc-lcp narrow Plates Reduced impairment of periosteal blood supply due to the limited plate-bone contact.Early and active mobilization, even in the case of complex epimetaphyseal fractures and osteoporosis.

LC-LCP Broad Plate for Ø 4.5 / 5.0 mm

Lc-Lcp Broad plate design reduces plate-to-bone contact, thus limiting vascular trauma. Angular stable fixation of fragments regardless of bone quality.Reduced impairment of periosteal blood supply due to the limited plate-bone contact.

LC-LCP Combi Hole Recon Plate for Ø 3.5mm

These plates are designed to be used for pelvic and acetabular reconstructive surgery, fractures of Acetabulum, Sacrum, Ilium, Pelvic ring and fractures of Distal Humerus, Clavicle, Scapula and Calcaneal.Side cuts on these plates make them more flexible and widens the spectrum of their use.

LC-LCP One Third (1/3rd) Tubular Plates for 3.5 mm

Lc-Lcp One Third Tubular Plate is used to fix Lateral Malleolar fracture, Distal Ulnar fracture and Olecranon fracture. The plate holes support 3.5mm cortex and cannulated screws.

LC-LCP Small T.Plate for Ø 3.5mm

Lc-Lcp Small 'T' Plate 3.5mm is used for fixation of Partial Articular or Split Metaphyseal fractures of long bones, Proximal and Distal part of Humerus, Radius, Ulna, Tibia and Fibula.

LC-LCP T.Plate Oblique angle for Ø 3.5mm

Lc-Lcp Oblique 'T' Plate 3.5mm is used for fixation of Distal Radius fractures of Humerus.The Safety locking feature provides angular stability.

LC-LCP T.Plate for Ø 4.5 / 5.0mm

Lc-Lcp 'T' Plate 3.5mm is used for fixation of Partial Articular or Split Metaphyseal fractures of long bones, Proximal and Distal part of Humerus, Radius, Ulna, Tibia and Fibula.

LC-LCP T.Buttress Plate for Ø 4.5 / 5.0mm

Lc-Lcp T.Buttress plate Reduced impairment of periosteal blood supply due to the limited plate-bone contact. Good Large selection of anatomically preshaped plates for a broad spectrum of indications.

LC-LCP L.Buttress Plate for Ø 4.5 / 5.0mm

Lc-Lcp L.Buttress plate Angular stable fixation of fragments regardless of bone quality. Reduced impairment of periosteal blood supply due to the limited plate-bone contact.

LCP Calcaneal Plates for 3.5mm Screws

Lcp Calcaneal Plate for 3.5mm Screws is used for Nonarticular body fractures (Noncomminuted and Comminuted) and Articular fractures involving posterior facet of Calcaneus bone.

DCS Barrel Plate 95° with Combi Hole

They are used for the fixation of subtrochanteric fractures. The main purpose of it is to allow the plate to enter the femur. In addition to this, we also offer customization services as per the requirements.

LCP Encirclage wire Mount 5.0 mm

Lcp Wire mount Threaded hole section for locking screws provides ability to create fixed-angle constructs.

LC-LCP Combi Hole Recon Plate for Ø 4.5mm

LC-LCP COMBI HOLE RECON PLATE FOR Ø 4.5MM

LCP DISTAL RADIUS PLATE - VOLAR PLATES

LCP DISTAL RADIUS PLATE - VOLAR PLATES

LCP DISTAL RADIUS STRAIGHT PLATE - DORSAL PLATES

LCP DISTAL RADIUS T - PLATE - DORSAL PLATES

LCP Medial Distal Humeral Plates 2.7/3.5

LCP Metaphysial Plate 3.5 MM ( Medial & Distal Humerus )

$Dr. Vinay\'s Pilon Fracture Plate for Ø 3.5/ 4.5/ 5.0mm With Lateral Extension$

Dr. Vinay\'s Pilon Fracture Plate for Ø 3.5/ 4.5/ 5.0mm With Lateral Extension

Dr. Vinay's Pilon Fracture Plate for Ø 3.5/ 4.5/ 5.0mm With Lateral Extension

Dr. Vinay's Pilon Fracture Plate for Ø 3.5/ 4.5/ 5.0mm Without Lateral Extension

Dr. Vinays Pilon Fracture Plate for Ø 3.5/ 4.5/ 5.0mm Without Lateral Extension

DHS Barrel Plate With Combi Hole 135° (A.O Type , Long )

LCP CALCANEUS PLATE (AO-TYPE)

Calcaneusl Plate accept 3.5 MM cortical screw, 3.5 mm Cannulated and 4.0 Cancellous Bone screw.

They may be used for either left or right calcaneus.

LCP MEDIAL PROXIMAL TIBIA PLATE Ø 3.5 MM

The LCP Medial Proximal Tibial Plate 3.5 is a part of the GREENS LCP System, Which Merges locking screw technology with conventional plating techniques.

The Locking Compression Plate (LCP) has combi-holes in the plate shaft that combine a dynamic compression unit (DCU) hole with a locking screw hole.