INTER-LOCKING INSTRUMENT SET FOR TIBIA & FEMUR
 Cat.No. - 015-IS

 Nail/Drill Guide Bar Holder for Tibia - 1 piece
 Nail/Drill Guide Bar Holder for Femur - 1 piece
 Insertion Driving Head - 1 piece
 Ram Road - 1 piece
 Ram - 1 piece
 Wrench - 1 piece
 Protection Sleeve - 1 piece
 Drill Sleeve 11.0/8.0mm - 1 piece
 Trocar 8mm - 1 piece
 Drill Bit 4.0mm - 1 piece
 Bone Awl Curved- 1 piece
 Tissue Proctector - 1 piece
 Depth Guage - 1 piece
 Screw Driver - 1 piece
 Guide Wire Holding Forceps - 1 piece
 Reaming Rod Dia 3.0mm, Length 95 cm - 1 piece
 Giude Rod (Olive Point) Dia 3.0mm, Length 95 cm - 1 piece
 Aiming Trocar - 1 piece
 Drill Guide Bar for Tibia / Distal Jig - 1 piece
 Drill Guide Bar for Femur / Distal Jig - 1 piece
 Proximal Combined Jig for Tibia & Femur- 1 piece
 Cannulated Drill Bit 4.0mm / 1.8mm Extra Long - 1 piece
 

INTER LOCKING FEMORAL NAILS

Cat. No. 090-9 tp 13

DIA 9,10,11,12,13 MM

LENGTH 30 CM TO 48 CM (With 2 Cm Difference)

 Same Nail for Left / Right femur. Can be applied  either conventional or locked mode  lockingwith4.9mm locking bolt.

 Indication :
 For Conventional Medullary Nailing

• Transverse Fractures
• Short Oblique Fractures
• Pseudoarthrosis

 For Locked Medullary Nailing

• Unstable Fracture
• Long Torsional Fractures
• Segmental Fractures
• Fracture with bone defects.

INTERLOCKING TIBIAL NAILS

Cat. No. 091-12-24 to 42

DIA 9,10,11,12 MM

LENGTH 24 CM TO 42 CM

(With 2 CM Difference)

 Same Nail for Left / Right Tibia. Can  be applied either conventional or  locked mode locking with 4.9mm  locking bolt.

 Indication :
 For Conventional Medullary Nailing  For Locked Medullary Nailing

• Transverse Fractures
• Pseudoarthrosis
• Fracture near the Metaphysis
• Segmental Fractures
• Communited Fractures
• Fracture with bone defects.
• Long Torsional Fractures.

INTERLOCKING HUMERUS NAILS

Cat. No. 092-6.7 19 to 31

DIA - 6.7 MM

LENGTH - 19 CM TO 31 CM

(With 1 Cm Difference)

LOCKING BOLTS (Self Tapping)

Dia -3.4MM

Length - 16 to 60 MM

(With 2 MM Difference)

 INSTRUMENT SET FOR HUMERUS INTER-LOCKING NAIL
 Cat.No. - 017-IS

 Combination wrench(11mm)
 Slotted Hummer
 Awl With T- Handle(cannulated)
 Protection sleeve 8.0/2.7
 Trocar 8.0mm
 Depth guage for locking Bolt
 Inserter/Extractor for UHN
 Iinsertion Handle for UHN
 Connection screw for UHN
 Measuring device for UHN
 Compression connection screw
 Burr(Bullet Point)
 Coupling block for UHN extraction
 Drill bit 2.7mm Dia for 6.7mm UHN 
 Instrument Box for Humerus Interlocking (Optional)