Instrument set
Back

 SCREW SET - SMALL
 Cat.no.- 002-IS

 Cortical Screws 3.5 mm
 sizes - 10,12,20,22,24,26,28,32,36,40mm - 4 each
 sizes - 14,16,18mm -8 each

 Cancellous Screws 4.0 mm
 sizes - 12,14,16,18,20,22,24,26,28,30,35,40,45,50mm - 2 each

 Cancellous Screws 3.5 mm
 sizes - 12,14,16,18,20,22,24,26,28,30,35,40,45,50,55,60mm - 2 each

 Small Washers - 10 pieces
 Screw Holding Forceps - 1 piece
 S.S Box with Tray - 1 piece

 SCREW SET - LARGE
 Cat. no.- 001-IS

 Cortical Screws 4.5mm
 sizes - 14,16,18,20,22,24 - 7 each
 sizes - 28,28mm - 14 each
 sizes - 30,32,34,36,38mm 12 each
 sizes - 40,41,44,46,48,50mm-6 each

 Cancellous Screws 6.5mm x 16m thread
 sizes - 25,30,35,40,45,50,55,60mm - 2 each
 sizes - 65,70,75,80,85,90,95 - 3 each
 sizes - 100,105,110mm - 2 each

 Cancellous Screws 6.5mm x 32m thread
 sizes - 35,40,45,50,55,60mm -4 each
 sizes - 65,70,75,80,85,90mm -2 each

 Malleolar Screws 4.5mm
 sizes - 25,30,35,40,45,50,55,60mm -2 each

 Scale with Drill Guage 6” - 1 piece
 Large Washers - 10 pieces
 Screw Holding Forceps - 1 piece
 S.S Box with Tray - 1 piece

 INTER-LOCKING INSTRUMENT SET FOR TIBIA/FEMUR
 Cat.No. - 015-IS

 Nail/Drill Guide Bar Holder for Tibia - 1 piece
 Nail/Drill Guide Bar Holder for Femur - 1 piece
 Insertion Driving Head - 1 piece
 Ram Road - 1 piece
 Ram - 1 piece
 Wrench - 1 piece
 Protection Sleeve - 1 piece
 Drill Sleeve 11.0/8.0mm - 1 piece
 Trocar 8mm - 1 piece
 Drill Bit 4.0mm - 1 piece
 Bone Awl Curved- 1 piece
 Tissue Proctector - 1 piece
 Depth Guage - 1 piece
 Screw Driver - 1 piece
 Guide Wire Holding Forceps - 1 piece
 Reaming Rod Dia 3.0mm, Length 95 cm - 1 piece
 Giude Rod (Olive Point) Dia 3.0mm, Length 95 cm - 1 piece
 Aiming Trocar - 1 piece
 Drill Guide Bar for Tibia / Distal Jig - 1 piece
 Drill Guide Bar for Femur / Distal Jig - 1 piece
 Proximal Combined Jig for Tibia & Femur- 1 piece
 Cannulated Drill Bit 4.0mm / 1.8mm Extra Long - 1 piece
 Optional instrument
 Proximal fragment manipulator
 Flexible Reamer Shaft for Detachable Heads - 1 piece
 Detachable Reaming heads- 8.0mm to 12.0mm - 1 piece(With 0.5mm  Difference)
 

 INSTRUMENT SET FOR LARGE CANNULATED CANCELLOUS  SCREW
 Cat. No. - 009-IS

 Cannulated Drill Bit 4.5mm - 1 piece
 Cannulated Drill Tap - 1 piece
 Parallel Wire Guide - 1 piece
 Direct Measuring Device - 1 piece
 Guide Wire 1.8mm Threaded - 5 pieces
 Large Cannulated Screw Driver - 1 piece
 Protection Sleeve 4.5mm - 1 piece
 S.S Box with Tray - 1 piece

 INSTRUMENT SET FOR DHS
 Cat. No. - 011-IS

 DHS Angle Guide - 1 piece
 Guide Wire - 6 pieces
 DHS Tripple Reamer with Coupling End - 1 piece
 T-Handle with Quick Coupling - 1 piece
 Direct Measuring Guage - 1 piece
 Centering Sleeve for DHS Wrench & Tap - 1 piece
 DHS Tap - 1 piece
 Wrentch for DHS Screw - 1 piece
 DHS Impactor - 1 piece
 Long Cannulated Coupling Screw - 1 piece
 S.S Box with 3 Trays - 1 piece

 QUICK COUPLING SCREW DRIVER SET
 Cat. No. - 016-IS

 Universal Fibre Handle for Quick Coupling Screw Driver Shaf

 Lane’s Screw Driver with Quick Coupling Shaft

 Hexagonal Screw Driver 3.5mm with Quick Coupling Shaft

 Hexagonal Screw Driver 4.5mm with Quick Coupling Shaft 

SCREW SET - SMALL,    SCREW SET - LARGE,   INSTRUMENT SET FOR INTER-LOCKING NAIL 

INSTRUMENT SET FOR LARGE CANNULATED CANCELLOUS SCREWS

INSTRUMENT SET FOR DHS    QUICK COUPLING SCREW DRIVER SET

  

Screws    Pins      Nails     Plates     Prosthesis     Fixators     Instruments   Interlockings    Spinal surgery Implants
     
         

 

 

 

 

 

 

 

Go to Top

 
             
         

 
          Go to Top  
             
             
         

 

 

Go to Top

 
         

 

 

 

 

 

 Go to Top

 
             
         

 

 

 

 

 Go to Top

 
       

 

 

 

 

 

 

Back

 

 

 

 

 

 

 

 Go to Top